KeyboardsFILCO Majestouch Xacro M10SP
A wired, split 70% keyboard with Cherry MX switches and ten dedicated macro keys along the inner edges, supporting hardware and software macros.
1008 results
KeyboardsA wired, split 70% keyboard with Cherry MX switches and ten dedicated macro keys along the inner edges, supporting hardware and software macros.
TrackballsA wired USB symmetrical trackball with a 55 mm ball, a scroll ring and 4 buttons, supplied with a detachable wrist rest.
TrackballsA finger-operated, ambidextrous trackball with a 55mm ball, twist scrolling, and wired, 2.4GHz and Bluetooth connections.
KeyboardsA wireless full-size ergonomic keyboard whose one-piece curved body splits the two key halves at 25° and raises the center by 12°, with a cushioned wrist rest built in.
Vertical miceA right-handed 57° vertical mouse sized for small to medium hands, running on one AA battery and connecting over Bluetooth or a Logi Bolt receiver to up to three devices.
Vertical miceA vertical mouse with a 57° angle that connects by Bluetooth, Unifying receiver or USB-C cable, with a 4000 dpi sensor and four programmable buttons.
Vertical miceRazer's first vertical mouse: a right-handed 150 g model tilted at 71.7°, with 2.4 GHz, Bluetooth and wired USB-C connections and a rated battery life of up to six months.
TrackballsELECOM's IST M-IT10DR is a thumb-operated 2.4GHz wireless trackball with a 36mm ball, five buttons and an artificial ruby ball support.
Vertical miceRight-handed wireless vertical mouse from Evoluent (VM4RW) that connects through a USB receiver, has six buttons and keeps the hand in a handshake posture.
Vertical miceA mid-size wireless vertical mouse that connects over a 2.4GHz USB-A nano receiver, with an extended pinky rest, forward/back buttons and five DPI settings from 800 to 2400, powered by one AA battery.
Vertical miceA right-handed vertical mouse with a 46.7-degree slope that connects over a 2.4GHz nano receiver and runs on a single AA battery.
TrackballsThe Logitech ERGO M575S (sold in Japan as the M575SP) is a right-handed wireless thumb trackball with a 34 mm ball. It is a quiet-click update of the M575 that connects over Logi Bolt or Bluetooth and runs on one AA battery.
TrackballsELECOM's DEFT is a wireless index-finger trackball with a roughly 34 mm ball, 8 buttons and a tilt wheel, connecting through a 2.4GHz receiver.
TrackballsA right-handed, finger-operated trackball with a 44 mm ball, 8 buttons and a tilt wheel, supporting wired, 2.4 GHz wireless and Bluetooth connections.
Vertical miceThe wired, right-handed medium-size model of Evoluent's VerticalMouse D line, aimed at hands of 7.0 to 7.5 inches, with six buttons and a USB Type-A cable.
TrackballsA symmetrical finger-operated trackball with a 55mm ball, scroll ring, two side rollers and 8 buttons, connecting to up to four devices over Bluetooth, 2.4GHz or USB-C; it was discontinued in 2026.
TrackballsA symmetrical finger-operated trackball with a 55 mm ball, a scroll ring around the ball and four buttons, connecting over Bluetooth LE or a 2.4 GHz USB nano receiver.
TrackballsA wired USB ambidextrous trackball from Kensington with a 40mm ball and two buttons; it has no scroll wheel.
KeyboardsThe Keychron Q11 is a wired, all-aluminum split keyboard that keeps a conventional row-staggered 75% layout and adds QMK/VIA support, hot-swap sockets, and two knobs.
KeyboardsA 76-key fully split wireless keyboard with contoured keywells, thumb clusters, three-position integrated tenting and ZMK-based firmware.
TrackballsA thumb-operated wireless trackball that succeeds the MX Ergo with quiet clicks and USB-C charging, keeping the magnetic plate that switches between flat and 20-degree tilt and pairing with up to two devices over Logi Bolt or Bluetooth.
KeyboardsPerixx's wired USB unibody split-shaped keyboard with a 3-D contoured layout, integrated palm rest and a full-size 104-key ANSI layout.
KeyboardsA full-size wireless keyboard with a one-piece split layout, low-profile Kailh mechanical switches and an integrated palm rest, connecting by USB-C, 2.4 GHz or Bluetooth.
TrackballsA right-handed wireless vertical mouse with a 62° tilt and a thumb-operated trackball, switching between one 2.4GHz receiver and two Bluetooth connections.
TrackballsA wired thumb-operated trackball from Sanwa Supply with a 34mm ball, a 15° tilted body and silent buttons.
Vertical miceA 45° vertical ergonomic wireless mouse aimed at MMO play, with 10 programmable side buttons and tri-mode connection (2.4G, Bluetooth 5.0, USB-C).
Vertical miceThe Zelotes T-20 is a right-handed wired USB optical vertical mouse with 6 buttons and up to 3200 DPI.
KeyboardsA full-size 105-key wireless membrane keyboard with a split-key contoured layout, integrated palm rest and built-in trackball, connecting through a 2.4 GHz USB receiver.
TrackballsA large right-handed trackball with a 52 mm ball operated by the index and middle fingers, eight buttons, a tilt wheel, and a 2.4 GHz USB receiver.
Vertical miceThe provided pages contained no product information, so specs could not be verified.
Vertical miceA budget 2.4 GHz wireless vertical mouse with six buttons, a 1000–2400 DPI optical sensor, quiet clicks and two AA batteries for power.
TrackballsA right-handed Kensington wireless trackball with a finger-operated 40mm ball, a surrounding scroll ring and five buttons, connecting through a 2.4GHz dongle.
TrackballsA right-handed wireless trackball with a 34mm thumb-operated ball, Bluetooth LE and 2.4GHz connections, a 45° tilt and a 4D scroll wheel.
A symmetrical wired USB trackball with a centrally mounted 55 mm ball, four buttons, and scrolling done by twisting the ball.
KeyboardsA wired USB split keyboard with membrane switches and a standard Windows row-staggered layout whose two halves, joined by a pivot tether, separate up to 9 in (or 20 in on the extended version), with tenting added via optional accessories.
KeyboardsA wireless ergonomic keyboard with a wave-shaped curved layout, integrated memory-foam palm rest and a numeric keypad, connecting via Bluetooth or Logi Bolt.
KeyboardsA 75% mechanical keyboard whose two halves can be separated, using Cherry MX switches and offered in Japanese (JIS) and English (US) layouts.
TrackballsThe Nulea M512 is an ambidextrous, rechargeable wireless trackball with a 55mm ball that connects to up to three devices via Bluetooth or 2.4 GHz.
Vertical miceA wireless vertical mouse from Perixx with silent-click buttons and a small body, connecting via a 2.4GHz receiver or Bluetooth.
TrackballsThe Perixx PERIMICE-717 is a right-handed 2.4 GHz wireless trackball with a 34 mm ball and 5 programmable buttons.
Vertical miceA small wireless vertical mouse from Perixx for right-handed use, with six silent-click buttons, a 2.4 GHz receiver and a weight of 118 g.
KeyboardsThe ProtoArc EK01 Plus is a full-size 117-key wireless keyboard with a curved split-key layout, cushioned wrist rest, scissor switches and a backlight.
TrackballsA thumb-operated wireless trackball with a hinge that tilts the body from 0 to 20 degrees, connecting to up to three devices via Bluetooth or a 2.4G receiver.
TrackballsA quiet, 5-button Bluetooth 5.1 trackball operated with the index and middle fingers, using a roughly 44 mm ball.
TrackballsA wired thumb-operated laser trackball with a 34 mm ball, a palm-filling ergonomic body, and a tilt scroll wheel.
Vertical miceA wired USB vertical gaming mouse with 11 programmable buttons, a sensor up to 10000 DPI and RGB lighting.
TrackballsAn assistive USB trackball with a 3-inch (76 mm) ball, two large colour-coded buttons placed behind the ball, and two 3.5 mm switch jacks for left and right click.
Vertical miceThe Adesso iMouse A20 is a right-handed, 6-button vertical mouse with 2.4 GHz wireless connectivity and antimicrobial material.
Vertical miceThe Adesso iMouse E10 is a right-handed 2.4 GHz wireless vertical mouse with a 50-degree angle, six buttons and three switchable DPI levels.
KeyboardsA wired USB membrane keyboard with a one-piece split-zone design, a 105-key US layout, and three-color (green/blue/red) backlighting.
KeyboardsA one-piece ergonomic keyboard with split key zones and a gently sloped shape, bundled with a 2.4GHz wireless laser mouse for Windows PCs.
KeyboardsThe Adesso WKB-1600CB is a 2.4GHz wireless membrane keyboard with split key zones and a gently sloped shape, bundled with an optical mouse.
KeyboardsA full-size wireless 2.4GHz membrane keyboard with split key zones, a contoured one-piece body, an integrated palm rest and a built-in GlidePoint touchpad.
TrackballsBuffalo's first trackball is a thumb-operated model with a 34mm ball, a metal fast-scroll tilt wheel, up to 3 paired devices, quiet buttons, and a single AA battery.
KeyboardsThe ABM066 is a 66-key plus knob Alice-layout monolithic keyboard with gasket mount, hot-swap sockets, VIA support and wired, Bluetooth and 2.4G connectivity.
TrackballsELECOM's DEFT is a finger-operated 2.4GHz wireless trackball with a 34mm ball, a tilt wheel, and 8 buttons, three of which are assignable.
TrackballsELECOM's thumb-operated Bluetooth trackball with a 36mm ball, bearing-supported ball unit and five buttons.
TrackballsA thumb-operated ELECOM trackball with a 36 mm ball on a bearing support, connecting to up to 3 devices over Bluetooth or 2.4GHz wireless.
TrackballsElekit's first keyboard kit: a 44-key wireless split column-staggered board with swappable pointing modules, including a 34mm trackball, on either side.
KeyboardsA 60-key curved split keyboard from Ergohaven with magnetically attached encoder, touchpad and trackball modules, running QMK with Vial support.
KeyboardsA foldable, wired USB compact split keyboard whose halves join at a ball joint, adjustable from 0 to 30° in splay and tenting.
KeyboardsA wired USB unibody split ergonomic keyboard from Incase, designed by Microsoft, with a built-in number pad and cushioned palm rest.
Vertical miceA right-handed wireless vertical mouse with a 52-degree angle, seven buttons, and Bluetooth 5.2 or 2.4 GHz dongle connection across three saved devices.
TrackballsA wired USB, ambidextrous trackball with a centrally placed 40 mm ball, a scroll ring around it, and two buttons.
TrackballsKensington's Orbit Wireless is an ambidextrous trackball with a central 40mm ball, a scroll ring and a detachable wrist rest, connecting over 2.4GHz or Bluetooth LE.
TrackballsA right-handed, thumb-operated 34mm trackball with a 45° tilt, designed for easy transition from a mouse, connecting via Bluetooth LE or a 2.4GHz receiver.
Vertical miceThe Kinesis DXT Mouse 2 is a compact ambidextrous vertical mouse used with a pen-like fingertip grip, sold in a wired version and an RF-dongle wireless version.
KeyboardsThe Kinesis mWave is a fixed-split, tenkeyless low-profile mechanical keyboard with integrated tenting and palm support, usable over USB or Bluetooth.
KeyboardsThe Leobog Alice A75 is an 83-key, 75% Alice-layout tri-mode mechanical keyboard with a knob, a five-way joystick and hot-swap sockets.
KeyboardsA Matias keyboard modeled on the Microsoft Sculpt, with a fixed splayed gull-wing layout, scissor switches, a palm rest and on-board programming.
Vertical miceA compact 2.4GHz wireless ergonomic mouse tilted about 63°, with all buttons silent and designed for a fingertip (pinch) grip.
TrackballsThe Nulea M505 is a wireless trackball with a 44mm index-finger ball that connects to up to 3 devices via Bluetooth or a USB receiver.
TrackballsThe Nulea M509 is a wired trackball mouse with a 2-in-1 Type-A/Type-C cable, weighing 130 g, with DPI switchable from 100 to 1200.
KeyboardsA wireless set pairing a one-piece split-key low-profile membrane keyboard with a 5-button vertical mouse, both running off a single shared USB nano receiver.
TrackballsA wired USB ambidextrous trackball from PI Engineering with a 57 mm ball and three buttons, where the middle button works as drag lock or scroll lock.
TrackballsThe Pretorian OPTIMA Rollerball is a wired USB (PS/2 adapter included) ambidextrous desktop trackball with a 51 mm ball and optical tracking, designed with users with limited motor skills in mind.
KeyboardsA 100-key wireless ergonomic keyboard with a wave-shaped layout and a cushioned built-in palm rest.
TrackballsThe ProtoArc EM02 is a thumb-operated wireless trackball with 2.4GHz and Bluetooth connectivity, USB-C charging and five DPI levels.
TrackballsA right-handed wireless trackball with a 44mm ball operated by the index or middle finger, supporting up to three devices via 2.4G and dual Bluetooth.
TrackballsA thumb-operated ergonomic trackball with a handshake-like grip angle, silent buttons on every switch, dual 2.4GHz/Bluetooth wireless and a rechargeable battery.
TrackballsA wired, index-finger trackball with a 44mm ball and five buttons, where the left and right clicks are pressed with the thumb.
A wired, thumb-operated ergonomic trackball from Sanwa Supply with a tilted body, USB connection, five buttons and a tilt wheel.
TrackballsA thumb-operated 2.4GHz wireless trackball with a 34mm ball and a body tilted 15° for a more natural wrist position.
TrackballsSanwa Supply's rechargeable 2.4GHz wireless thumb trackball with a 34mm ball, 5 buttons and a roughly 15-degree tilt.
TrackballsA wired, handheld gun-grip optical trackball for use without a desk, with a DPI button that switches between 400 and 1000 dpi.
KeyboardsA 36-key, 40%-layout split hotswap keyboard kit with wired USB connection, programmable via QMK/VIAL.
Vertical miceThe Zelotes F-35 is a rechargeable 2.4GHz wireless vertical ergonomic mouse with 6 buttons and adjustable DPI up to 2400.
Vertical miceA wired right-handed vertical mouse from Adesso with 6 buttons, up to 6400 DPI and removable adjustable weights.
Vertical miceA right-handed wireless vertical mouse from Adesso with a 2.4 GHz USB receiver, six buttons and DPI adjustable up to 4800 with the included driver.
TrackballsThe Adesso iMouse T30 is a right-handed 2.4 GHz wireless thumb trackball with a 34 mm ball and 7 programmable buttons.
Vertical miceThe Adesso iMouse V10 is a compact right-handed vertical mouse with a 2.4 GHz USB receiver, one AA battery, six buttons and three DPI levels (800/1200/1600).
KeyboardsA compact 2.4 GHz wireless membrane keyboard from Adesso with a split-zone, sloped 87-key US layout, integrated palm rest and a removable 25 mm built-in trackball.
Vertical miceA wired right-handed vertical mouse sized for smaller hands, with six programmable buttons and four DPI settings.
KeyboardsA 42-key (breakable to 36) split low-profile keyboard on RP2040 with a strong column-stagger Cantor layout, Kailh Choc v1 hotswap sockets and pre-flashed Vial firmware.
KeyboardsThe Cherry G84-4400 is an ultra-flat 83-key compact keyboard with a built-in trackball.
KeyboardsA wired USB full-size ergonomic keyboard with a curved key layout and a padded palm rest, aimed at reducing shoulder and wrist strain.
KeyboardsA slim, one-piece scissor-switch keyboard with a compact-financial layout, built to sit in front of a RollerMouse, offered in wired and 2.4 GHz wireless versions with a negative-tilt default.
Vertical miceA vertical mouse with a hinge adjustable from 35° to 70° and a movable thumb rest, sold in left and right versions, wired or wireless.
Delux M618AIR vertical mouse; the provided pages were only bot-check screens, so specs could not be verified.
TrackballsA 52 mm index-finger trackball with bearing support, an integrated palm rest, 10 assignable buttons and wired, 2.4 GHz and Bluetooth connectivity.
TrackballsA right-handed thumb trackball with a 36mm ball on a bearing support, 10 buttons, and Bluetooth, 2.4GHz wireless and wired USB connection with up to 6 registered devices.
KeyboardsELEKIT's first split keyboard kit: a 44-key column-staggered, fully wireless 40% layout with swappable trackball/trackpad modules on each half.
KeyboardsA 70% split wireless keyboard with 71 keys and a knob, featuring a gasket mount, hot-swap sockets and VIA support.
Vertical miceSmall-size wired USB version of Evoluent's sixth-generation VerticalMouse D, with grooved buttons, thumb buttons and a pointer speed button, aimed at hands under 17.8 cm long.
Vertical miceA right-handed wireless semi-vertical mouse with a 66° slope, a detachable ergo-grip flange and adjustable weights, connecting through a 2.4 GHz USB receiver.
Vertical miceThe Hippus HandShoe Mouse Light Click is a contoured ergonomic mouse that the hand rests on, with very low-force clicks, offered in left- and right-handed versions and several sizes.
Vertical miceThe Kinesis DXT Mouse 3 is a compact ambidextrous vertical mouse used with a pen-style fingertip grip, about 15% larger than the DXT 2, offered in a wired version and a Bluetooth/2.4GHz wireless version.
KeyboardsA wired, tenkeyless mechanical keyboard with fully separate halves (up to 20" apart), a 5/10/15 degree lift kit, hotswap switches and per-key RGB.
KeyboardsThe Kinesis Freestyle Pro is a wired, tenkeyless, fully split mechanical keyboard with Cherry MX Brown switches and onboard programming.
A wired USB, symmetrical four-button trackball with a 40 mm ball rolled by the fingers and no scroll wheel.
KeyboardsA wired USB split keyboard with Matias Quiet Click mechanical switches, detachable palm rests and 9° tenting legs.
KeyboardsA wired USB split keyboard with Matias Quiet Click mechanical switches, adjustable tenting and negative tilt, and 20 keys that can be programmed with macros.
KeyboardsAn 80-key, fully split wireless ergonomic keyboard with concave key wells, a 6-key thumb cluster and built-in tenting.
Vertical miceThe Newtral 3 is a six-button vertical mouse with a 33° outward angle, offered in right-hand small, medium and large (wired in medium only) and a left-hand medium, with magnetically attached grip flanges.
KeyboardsA full-size wireless ergonomic keyboard with a split-key layout and integrated palm rest, supporting 2.4GHz and Bluetooth.
KeyboardsA wired USB one-piece split-curved ergonomic membrane keyboard with an adjustable palm rest, sold as a set with a vertical mouse.
A symmetrical tri-mode (Bluetooth, 2.4GHz, USB-C) trackball with a 40mm ball operated by the index and middle fingers, silent buttons and a scroll wheel.
TrackballsThe X-keys L-Trac, carried over from CST's L-Trac, is a wired USB ambidextrous laser trackball with a 57 mm ball, three buttons, a scroll wheel and external switch jacks.
Vertical miceThe ProtoArc EM11 NL is a vertical wireless mouse for small to medium hands, connecting to up to three devices via dual Bluetooth 5.0 and a 2.4G USB-A receiver.
A thin two-piece split ergonomic keyboard with scissor switches and an LED break indicator, usable over Bluetooth or wired USB.
Vertical miceThe R-Go HE Break is a wired vertical ergonomic mouse with LED colour signals and software that prompt the user to take breaks.
A wired, trigger-style handheld trackball that works off the desk, with a symmetrical body and right-click buttons on both sides so either hand can use it.
TrackballsA Bluetooth thumb-operated trackball with a 34mm ball, a 15° tilted ergonomic shell, and silent switches on every button.
The SOLAKAKA SM520 is a wireless vertical mouse with tri-mode connectivity (Bluetooth 5.0, 2.4GHz) and a programmable side button.
Vertical miceThe TECKNET MS007 is a right-handed vertical wireless mouse with a 2.4GHz receiver, a stated 52-degree angle, 6 buttons and five DPI levels from 800 to 4800.
Vertical miceTECKNET's MS017 is a 52° vertical wireless mouse with Bluetooth 5.0/3.0 and a 2.4G USB-A receiver, switchable across up to three devices.
A low-cost wireless vertical mouse that connects through a USB receiver, runs on one AA battery, and has 800/1200/1600 DPI settings, quiet main buttons and two thumb buttons for back/forward.
A budget rechargeable vertical mouse with a 2.4 GHz USB receiver, six buttons and three DPI steps (1000/1600/2400).
A right-handed vertical wireless mouse using a 2.4G USB receiver, with 6 buttons, three DPI levels (1000/1600/2400) and a single AA battery.
A right-handed 2.4G wireless vertical mouse with 6 buttons and four DPI settings (1200/1600/2400/3200).
KeyboardsA wired USB tenkeyless keyboard with 89 JIS keys and a built-in optical trackball.
A compact index-finger Bluetooth trackball with a 34mm ball, 5 buttons and automatic pointer speed adjustment.
The Adesso iMouse E90 is a left-handed wireless vertical mouse with a 50-degree angle, a 2.4GHz USB receiver, six buttons and switchable 800/1200/1600 DPI.
TrackballsAn ambidextrous 2.4 GHz wireless trackball with a 2-inch ball, seven programmable buttons, a scroll wheel and five DPI steps from 400 to 4800.
A 2.4GHz wireless vertical mouse from Adesso with an adjustable angle, a DPI switch and an optical sensor.
Vertical miceA right-handed wireless vertical mouse with a USB-A receiver, a stated 60-degree tilt and switchable DPI (1000/1600/2400), shaped to suit larger hands.
KeyboardsA wired USB membrane keyboard without a numeric keypad, whose two halves are joined by a ball joint that allows up to 30° of tenting and 33° of splay.
KeyboardsA split Dactyl Manuform-style keyboard with a 3-key thumb cluster and in-house case, PCB and QMK firmware, sold assembled or as a DIY kit.
KeyboardsAn open-source 64-key split ortholinear keyboard from beekeeb with hotswap sockets, offered in wired and wireless versions.
KeyboardsA wired RP2040 split keyboard with Cantor's strong column stagger and low-profile Choc v1 switches, available in 42-key or 36-key form.
KeyboardsA compact, wired USB keyboard with 88 keys and an integrated optical trackball with two mouse buttons, aimed at restricted spaces and industrial or POS use.
Vertical miceA 5-button wireless vertical mouse that connects through a 2.4 GHz nano receiver, with a DPI switch (800–3000 CPI) and a detachable hand rest.
KeyboardsA wired 89-key tenkeyless mechanical keyboard with fully separate halves, a fixed 7-degree tent, Kailh Box switches and a central control wheel.
The Delux M618XU is a right-handed wired USB vertical mouse with 4000 DPI sensitivity, silent-click buttons and a removable palm rest.
The Delux M618XU is a wired USB vertical ergonomic mouse for right-handed users, with 6 buttons and a removable palm rest.
ELECOM's compact, quiet thumb-operated trackball with a 25mm ball and 5 buttons, switchable between 2.4GHz wireless and Bluetooth.
TrackballsELECOM's compact index-finger trackball with a roughly 34mm ball and 5 buttons, supporting switching between Bluetooth and a 2.4GHz receiver.
TrackballsA thumb-operated trackball with a 34 mm ball that connects by wired USB, a 2.4 GHz receiver, or Bluetooth 4.0, and carries a 3-year warranty.
TrackballsELECOM's thumb-operated trackball with a 36 mm ball on ball-roller support, five buttons, and Bluetooth or 2.4 GHz wireless connection to up to three devices.
KeyboardsA 68-key 65% split keyboard whose halves can be separated or magnetically joined, with QMK/VIA, hot-swap sockets and tri-mode connectivity.
Vertical miceA wired USB right-handed vertical optical mouse with a pen-grip posture, five buttons and 1600 dpi tracking.
Vertical miceA right-handed wired USB vertical mouse from Evoluent in the Large size (for hands 7.5 inches or more), with 6 buttons and a laser sensor.
KeyboardsA handmade 34-key column-staggered split keyboard from Poland using Kailh Choc v1 switches, offered in a wired VIAL version or a wireless ZMK version.
Vertical miceFellowes right-handed large vertical mouse with a 60° angle, Bluetooth, dongle or wired connection, and a rechargeable battery.
Vertical miceThe HP 920 is a wireless vertical mouse with a detachable wrist rest, five programmable buttons, and connection to up to three devices via Bluetooth 5.3 or the HP Unifying Dongle.
A right-handed wireless vertical mouse with a magnetic detachable wrist rest, connecting to up to three devices via a 2.4GHz dongle or Bluetooth 5.3.
KeyboardsA wireless ergonomic keyboard with a curved split key layout, cushioned palm rest and a separate number pad, connected through a USB dongle.
TrackballsThe ITAC Systems Mouse-Trak Professional is a stationary trackball with a 2-inch (50.8 mm) ball and an integrated hand support, operated with the fingertips.
Vertical miceThe J-Tech Digital V628X is a wired vertical mouse for large hands with a tilt adjustable from 53 to 73 degrees.
Vertical miceThe J-Tech Digital V638 is a rechargeable vertical mouse that connects through a 2.4GHz USB receiver and includes a detachable palm rest.
Vertical miceA right-handed vertical wireless mouse with 2.4 GHz dongle and Bluetooth 5.1 modes, a USB-C rechargeable battery and a removable palm rest.
KeyboardsThe Keebio Iris SE is a hotswap split keyboard with a 4x6 vertically staggered matrix per half plus 4 thumb keys, running QMK with VIA.
KeyboardsA low-profile split ortholinear keyboard from Keebio, offered in a 5-row 60% Nyquist or 4-row 40% Levinson layout, with an aluminum build, Choc V1/V2 hotswap sockets and QMK/VIA firmware.
TrackballsA right-handed, thumb-operated vertical trackball with a 34mm ball and 60° tilt, offering 2.4GHz dongle, dual Bluetooth and wired USB-C connections.
KeyboardsThe Keyboardio Atreus is a 44-key, compact split keyboard with columnar layout, hot-swap switches and Kaleidoscope firmware that is customizable through Chrysalis.
KeyboardsAn ultra-slim wireless keyboard with a split-fold Alice layout that folds inward, supporting 2.4 GHz, Bluetooth and wired connections.
KeyboardsA low-profile wireless 75% Alice-layout mechanical keyboard with QMK and Keychron Launcher remapping, available in a hot-swappable version.
KeyboardsThe Keychron Q8 is a wired 65% Alice-layout keyboard with a CNC-machined aluminum body, double-gasket design, hot-swappable switches and QMK/VIA support.
KeyboardsA contoured, fixed-split keyboard with concave key wells, thumb clusters, 20-degree built-in tenting and Cherry MX switches, fully programmable onboard; Kinesis plans to wind down production during 2026.
KeyboardsA fixed-split, low-profile mechanical keyboard in a machined aluminum case with a Windows Precision Touchpad between the halves, Bluetooth/USB connectivity and Clique web-based programming.
The LEKVEY 7L-01 is a rechargeable wireless vertical mouse with a 2.4GHz nano receiver, three DPI levels (800/1200/1600) and six buttons.
The LEKVEY XC-05 is a right-handed wireless vertical mouse with a 2.4GHz USB nano receiver, six buttons, three DPI levels and a built-in rechargeable battery.
A wireless trackball with a 44 mm red ball and eight buttons, using a 27 MHz receiver and two AA batteries, re-released in 2008 with a new color scheme.
A five-button, thumb-operated wireless trackball that connects through a Logitech Unifying receiver and runs up to 18 months on one AA battery.
TrackballsA right-handed, thumb-operated wireless trackball with a 35 mm ball that connects via USB receiver or Bluetooth LE and runs on one AA battery.
Vertical miceAn ambidextrous vertical mouse that clicks by rocking the body left or right, holding the hand at about 60° from horizontal; offered in wired and 2.4 GHz wireless versions.
TrackballsA pocket-sized wireless index-finger trackball with a 34 mm ball, 5 buttons and a 2.4 GHz USB receiver.
TrackballsThe Nulea M501 is a right-handed, thumb-operated wireless trackball with a 34mm ball and 6 non-programmable buttons, connecting to up to 3 devices via Bluetooth or a 2.4GHz USB dongle.
Vertical miceThe Nulea M510 is a 2.4G USB wireless vertical mouse with a 57-degree angle, powered by one AA battery and aimed at medium-sized hands.
KeyboardsA compact, pre-assembled wireless split keyboard with a 17.5 mm-pitch ortholinear layout and hot-swap sockets for Kailh Choc V2 switches.
Vertical miceA wired USB vertical mouse designed by an orthopedic surgeon, with swappable palm and finger adapters that allow six shape configurations.
KeyboardsThe Perixx PERIBOARD-330 is a wired USB membrane keyboard with a curved split-key layout, white backlighting and a magnetic attachable palm rest with three angles.
KeyboardsA wired 75% mini membrane keyboard with 87 keys and a built-in 0.55-inch optical trackball.
KeyboardsA wireless 2.4GHz membrane split keyboard with 86 keys, two fully separate halves and adjustable tilt feet.
KeyboardsA wireless compact split-key ergonomic keyboard bundled with a vertical mouse, supporting Bluetooth and 2.4 GHz, with an integrated palm rest.
Vertical miceA 2.4 GHz wireless vertical mouse from Perixx with 6 buttons and 800/1200/1600 DPI switching, designed for medium to large hands.
TrackballsA wireless vertical trackball mouse that connects by Bluetooth 4.1 or a 2.4GHz receiver, with detachable risers for 0, 10 or 20 degrees of angle.
Vertical miceA small wireless vertical mouse from Perixx that connects to up to three devices via 2.4GHz (USB-A/USB-C receivers) and Bluetooth, with silent clicks and a rechargeable battery.
Vertical miceA medium-size ambidextrous vertical mouse from Posturite with a bow-tie left/right switch, adjustable DPI and, in its current 3-in-1 version, wired USB, 2.4GHz wireless and Bluetooth connectivity.
TrackballsA symmetrical, low-force USB trackball built for users with motor difficulties, with dedicated buttons for click switching, double-click, drag lock, axis lock and scrolling.
TrackballsThe Pretorian OPTIMAX is a wireless trackball for users with motor skill difficulties, with a 51 mm ball and a receiver-based link working beyond 10 metres.
TrackballsA low-priced, thumb-operated trackball with a 15° tilt, Bluetooth and 2.4GHz connectivity for up to 3 devices, and silent clicks.
TrackballsAn ambidextrous finger trackball with a 55mm center ball and seven programmable buttons, configured through a browser and offering 2.4G, Bluetooth and USB-C connections.
Vertical miceThe ProtoArc EM11 Pro is a wireless vertical mouse with a 58° grip angle for medium to large hands, connecting to up to three devices via Bluetooth and a 2.4G USB-A receiver.
Vertical miceThe R-Go HE Basic Vertical is a right-handed Bluetooth vertical mouse with a 60-degree tilt, weighing 98 g, in size M.
Vertical miceThe R-Go Twister is a 60° vertical mouse whose upper body twists 180° to switch between left and right hand, and it folds for transport and works over Bluetooth or USB cable.
Vertical miceThe Rapoo EV200 is a wired USB right-handed vertical mouse with 3 buttons and an adjustable 1600 DPI optical sensor.
RS PRO mini keyboard with a trackball (136-9674); the fetched pages contained no specifications, so details are unverified.
A wired, right-handed thumb-operated trackball from Sanwa Supply with six buttons, a scroll wheel and four switchable resolutions from 400 to 1600 dpi.
A Bluetooth 4.0 wireless trackball with a 34 mm ball, a scroll wheel and a count-switch button.
TrackballsA thumb-operated trackball with a 34mm ball, a 54-degree tilted ergonomic body, a fast-scroll tilt wheel, and Bluetooth plus 2.4GHz pairing for up to three devices.
TrackballsA compact wireless thumb-operated trackball with a 32mm ball, five buttons and a 95.7mm-deep body that connects through a USB receiver.
TrackballsA wired thumb-operated trackball with a 15° tilt, a 34mm ball and five silent buttons.
A wired USB thumb-operated trackball from Sanwa Supply with three buttons and a scroll wheel, weighing 186 g.
TrackballsA 2.4GHz wireless trackball with a roughly 44mm ball operated by the index and middle fingers, five silent buttons and a scroll wheel.
TrackballsSanwa Supply's rechargeable 2.4GHz wireless thumb-operated trackball with a 34mm ball, 5 buttons, a 15° tilt and silent switches.
Vertical miceThe Seenda MOU200 is a right-handed wireless vertical mouse with a 52° angle, connecting up to 3 devices via a 2.4GHz receiver and two Bluetooth channels.
TrackballsThe Speedlink Aptico is a right-handed, thumb-operated wireless trackball with a 2.4GHz USB receiver, 5 buttons and a 4D scroll wheel.
KeyboardsA pre-assembled 42-key wired split keyboard based on the Corne layout, with hot-swappable MX switches, RGB backlighting and QMK/VIAL firmware.
KeyboardsA fully assembled 42-key low-profile split keyboard based on the Corne Choc form factor, with hot-swap Gateron KS-27/33 switches, QMK/VIAL firmware and RGB backlighting.
KeyboardsA pre-assembled wired split keyboard based on the Sofle v2.1 layout, with 58 hot-swappable MX switches, two rotary encoders, RGB lighting and QMK/VIAL firmware.
Vertical miceA 100 g handshake-style vertical mouse from Swiftpoint with six buttons, a wireless USB receiver, and bundled software for break reminders and presentations.
Vertical miceThe UGREEN MU008 is a right-handed wireless vertical mouse with a 57° angle, connecting over Bluetooth 5.0 or a 2.4G receiver to up to three devices.
KeyboardsAn aluminum unibody keyboard using X-Bows' radial-columnar layout, shipped with a magnetic numpad that attaches on either side, wired over USB and running QMK/VIA firmware.
Vertical miceThe Zelotes F-17 is a 2.4GHz wireless vertical mouse with 6 buttons and three DPI settings (1000/1600/2400).
KeyboardsA 40-key split wireless ZMK keyboard kit with 16mm key pitch and dual 19mm trackballs, with tenting built into the case.
TrackballsA right-handed, thumb-operated Bluetooth trackball with a 34mm ball, five silent buttons and a 15° tilted shape, rechargeable.
KeyboardsA hobbyist-made wireless split ortholinear low-profile keyboard with 17mm key pitch, a 3D-printed case, and a detachable 20mm trackball on either the left or right half.
TrackballsThe knot-c is a wired index-finger trackball with a 34mm ball, four physical buttons and two touch buttons, designed to sit between the halves of a split keyboard.
TrackballsA right-handed thumb-operated trackball with a 4.4cm ball and a scroll wheel, offered in wired and Bluetooth wireless versions.
A wired USB right-handed vertical mouse from Adesso with a 50-degree angle, six buttons and blue illumination.
The AKB-450UB is a USB membrane ergonomic keyboard with a split-key zone design, an integrated palm rest and a built-in touchpad.
A wired USB, 104-key US-layout membrane keyboard with split key zones in a one-piece body, a built-in palm rest and a scroll wheel.
Vertical miceA right-handed 2.4 GHz wireless vertical mouse with five buttons and three DPI levels (800/1200/1600), powered by two AAA batteries.
Vertical miceAn ambidextrous vertical mouse whose tilt angle can be set in five steps, sold in medium and large sizes, wired or wireless.
KeyboardsAssembled Dilemma V3 is a compact 36-key split keyboard with an integrated multi-touch trackpad, columnar stagger and hotswap Choc V1 sockets.
KeyboardsA 56-key 4×6 split keyboard with a number row, hotswap Choc V1 sockets and a built-in multi-touch trackpad, sold fully assembled from the Netherlands.
KeyboardsAn open-source wireless split ortholinear keyboard based on the Helix, with 64 keys (5×6+2 per side), Kailh Choc v1 hotswap sockets and ZMK firmware.
KeyboardsA wireless 40% split ortholinear keyboard running ZMK on a nice!nano v2, with 48 keys (4x6), soldered MX switches and a 3D-printed case.
TrackballsThe CST PC-Trac is an ambidextrous wired USB trackball with a 2.25-inch central ball; Pro models have three programmable buttons.
KeyboardsA full-size split mechanical keyboard using Kailh Box switches.
KeyboardsA pre-built 36-key low-profile split keyboard with a Corne-inspired layout, Kailh Choc hot-swap sockets, an RP2040 controller with OLED, and an aluminum case running QMK/Vial.
KeyboardsA pre-built 42-key low-profile split keyboard for Kailh Chocolate switches, with an RP2040, OLED display and connectors integrated into the main board.
KeyboardsA 38-key low-profile unibody split keyboard with an ortholinear, column-splay layout, hot-swappable Choc V1 switches, ZMK firmware, and Bluetooth or USB-C connection.
KeyboardsCyboard's made-to-order Dactyl Manuform split keyboard with a concave key well, hot-swappable MX sockets, Vial remapping and per-key RGB.
KeyboardsOff-the-shelf split keywell keyboard derived from Cyboard's made-to-measure Imprint, with 82 hot-swappable keys, a 34 mm trackball in each half, and tenting up to about 45 degrees.
KeyboardsA wired, split Dactyl Manuform 6x6 with a curved key well and thumb clusters, offering hotswap sockets and Vial configuration.
Vertical miceThe Delux M618 Mini is a small right-handed wireless vertical mouse with Bluetooth and 2.4G receiver connections, six buttons and a rechargeable battery.
A wired right-handed vertical ergonomic mouse from Delux with a removable palm rest, RGB lighting, 7 buttons and a weight of 210 g.
KeyboardsA 48-key ortholinear split keyboard inspired by the Planck, with a 40mm Cirque trackpad and a rotary encoder, sold by beekeeb as a pre-soldered build with Choc hotswap sockets.
KeyboardsA modular, magnetic split mechanical keyboard with an MCU in every key, letting you place keys anywhere on the baseboards (20–88 keys).
KeyboardsA fully split, column-staggered 70-key mechanical keyboard with 16 thumb keys, built-in tenting up to 60°, hot-swap sockets, and optional Bluetooth/RF wireless.
KeyboardsA portable low-profile unibody keyboard with a split columnar layout, 56 hot-swappable Gateron KS-33 2.0 switches, 8 thumb keys, and USB plus Bluetooth for up to 5 devices.
TrackballsA wired USB thumb-operated trackball from ELECOM with five buttons and a tilt wheel, released in 2015 and now discontinued.
TrackballsA left-handed, thumb-operated wireless trackball from ELECOM with a roughly 34 mm ball, a 2.4GHz USB receiver, six buttons and a tilt wheel.
KeyboardsThe ElimKeys Elytra is a wireless split low-profile keyboard with a CNC aluminum case and a 63-key row-staggered layout.
KeyboardsThe Enigma_04 is an assembled 28-key split ortholinear 30% keyboard with a narrow 17mm key pitch and wireless connectivity via ZMK firmware.
KeyboardsA 65% unibody Alice-layout keyboard with 66 keys plus a knob, CNC aluminum case, gasket mount, hot-swap PCB, tri-mode wireless and QMK/VIA support.
Vertical miceA wireless vertical handshake mouse with 2.4GHz and Bluetooth connections, an onboard OLED screen, and five buttons you can reassign on the mouse itself without installing software.
KeyboardsA prebuilt, 3D-printed, column-staggered split keyboard with 58–60 keys, hotswap MX sockets and Vial support.
KeyboardsA wired 46-key split keyboard with a curved 3D-printed case and hot-swappable trackball, touchpad or encoder modules on either half, running QMK firmware.
KeyboardsA 46-key 3D-printed true split keyboard from Ergohaven with a columnar layout, keywell, three-key thumb clusters, hotswap sockets and Vial support.
KeyboardsA pre-assembled split keyboard reworking the Redox design, using an RP2040 with QMK/VIAL and a USB-C link between the halves.
TrackballsA low-cost thumb-operated trackball that pairs with up to three devices over Bluetooth or a 2.4GHz receiver and recharges via USB-C.
KeyboardsA handmade one-piece, column-staggered 42-key keyboard from Poland with a milled wood or PETG case, available wired (VIAL) or wireless (ZMK Studio).
KeyboardsA handmade wired 76-key column-staggered split keyboard from FalbaTech with hot-swap Cherry MX sockets and VIAL configuration.
KeyboardsA handmade, wired-only split keyboard from Poland that puts the full 76-key ErgoDox layout on low-profile Kailh Choc v1 switches.
Vertical miceFellowes' large ambidextrous vertical wireless mouse connects via USB dongle or Bluetooth and has an antimicrobial surface.
Vertical miceSmall size of Fellowes' Penguin ambidextrous vertical mouse, wireless via USB dongle or Bluetooth, with a switch for right- or left-hand use.
A thumb-operated trackball for gaming, developed with ProtoArc, with a 34mm ball, six buttons, wired, 2.4GHz and Bluetooth connections, and a 20-degree adjustable base.
Trackballswristball is a wired DIY kit combining a 25mm trackball and a 4-key macro pad, designed to sit between a keyboard and wrist rest.
TrackballsThe wristball2 is a wireless DIY prototype kit with a 25 mm trackball that sits between the keyboard and wrist rest, with four extra keys.
KeyboardsThe Goldtouch Elite is a wired, membrane split keyboard with infinitely adjustable tenting (0–60°) and splay (0–30°).
TrackballsA HIDISC 2.4GHz wireless ergonomic trackball designed to be used with the hand resting lightly from the side.
KeyboardsA 44-key, row-staggered 40% split keyboard that connects over Bluetooth, runs ZMK firmware and takes Kailh low-profile switches.
TrackballsA compact wireless rollerball for users with motor skill challenges, working over 10+ metres via the it-Receive receiver, with three buttons and threaded mounting holes.
Vertical miceA wireless 2.4 GHz vertical mouse from J-Tech Digital with a removable palm rest, three DPI steps and thumb buttons for back/forward navigation.
Vertical miceA right-handed vertical wireless mouse for small to medium hands, with 2.4G and Bluetooth connectivity for up to 3 devices and 5 DPI levels.
Vertical miceA wired USB vertical mouse from J-Tech Digital with a detachable palm rest, two thumb buttons for back/forward, and a DPI button that switches sensitivity up to 1600 DPI.
Vertical miceA compact wireless vertical mouse for smaller hands, using a 2.4GHz USB transceiver and one AA battery, with three DPI settings.
Vertical miceA wired USB right-handed vertical mouse with 7 buttons, four DPI settings (800–3600), RGB LEDs and a magnetic removable palm rest.
KeyboardsA pre-built 76-key fully split keyboard using the ErgoDox layout, with hot-swap MX sockets, OLED layer screens and VIA-compatible firmware.
KeyboardsA pre-built 48-key, column-staggered split low-profile keyboard in a CNC aluminium case, with tool-free tenting from 6° to 24°, Bluetooth and USB-C, hot-swap Choc switches and Vial support.
KeyboardsThe Jiffy75 LP is a fully wireless 75% split low-profile keyboard with a standard row-staggered layout, and its halves can be joined magnetically.
KeyboardsA wired 36-key split keyboard that Keebart redesigned from weteor's 3w6, with an RP2040 controller, per-key RGB, hot-swap sockets for Choc v1 and v2, and QMK/VIAL configuration.
KeyboardsA split 60% ortholinear keyboard that takes a standard keycap set, with hotswap MX-style sockets and QMK/VIA firmware, sold as a kit or pre-built.
KeyboardsA fully split QMK/VIA keyboard with a 4x6 column-staggered layout, four thumb keys per half and MX hotswap sockets, offered as a kit, assembled or barebones.
KeyboardsA row-staggered split 75%/TKL keyboard modeled on the G80-5000 layout, with a nav cluster, a left-side macro column, and QMK/VIA firmware; it is now discontinued or sold out.
KeyboardsThe Keyboardio Model 100 is a wired, two-halves split keyboard with 64 hot-swappable mechanical switches, a hardwood enclosure, and open-source Kaleidoscope firmware.
KeyboardsThe Keychron K11 Max is a slim 65% wireless keyboard with a 68-key Alice layout, low-profile Gateron switches and QMK support.
Vertical miceKeychron's right-handed wireless vertical mouse with a 47° angle, a PixArt sensor up to 30,000 DPI, and polling up to 8,000 Hz over 2.4 GHz, Bluetooth or wired.
KeyboardsThe Keychron Q10 is a wired, full-aluminum 75% QMK keyboard with an Alice layout, a left-side knob and hot-swappable switches.
KeyboardsThe Keychron Q13 Max is a 96% Alice-layout wireless keyboard with an aluminum gasket-mount body, hot-swappable switches and QMK firmware.
KeyboardsThe Keychron Q14 Max is a 96% Alice-layout, southpaw (left-side numpad) keyboard with a full CNC aluminum body, hot-swap switches, QMK firmware, and 2.4 GHz, Bluetooth and wired connectivity.
TrackballsKeychron's first trackball uses a thumb-operated 34mm ball whose position can be shifted forward, back, sideways and in height, with left/right clicks on MagOptic switches that can run in optical or magnetic mode.
KeyboardsThe Keychron V10 is a wired 75% Alice-layout QMK keyboard with a left-side knob and hot-swappable switches.
KeyboardsThe Keychron V8 is a wired 65% Alice-layout QMK keyboard with hot-swappable switches and a knob.
Vertical miceThe Kinesis PD7DXT is a compact wired USB vertical mouse usable with either hand, with a button to switch between right- and left-handed use.
Vertical miceA right-handed, semi-vertical wireless mouse with cork side grips, connecting through a USB-A RF receiver and powered by one AA battery.
KeyboardsA wired split keyboard kit that keeps the 58-key column-staggered Lily58 layout, with most parts pre-soldered so only switches and OLED parts need soldering.
KeyboardsA wired 44-key split mechanical keyboard based on the Claw44 layout, with silent tactile switches and VIA-based keymap customization.
The Manhattan 190336 is a right-handed vertical wireless mouse with a 60-degree angle, a 2.4 GHz USB-A nano receiver, six buttons and three switchable DPI levels.
KeyboardsA Corne-style split keyboard sold in stock by MetaKeebs, offered in standard and low-profile versions.
KeyboardsThe Mistel MD770PRO is an 83-key, 75% split mechanical keyboard in a CNC aluminum case with tri-mode wireless, hot-swap switches and VIA support.
KeyboardsA flat, wireless split keyboard with 60 keys in a column-staggered layout, low-profile hot-swappable switches, a built-in touchpad on each half and 6-step tenting, sold with a compact travel case.
KeyboardsAn assembled 41-key split ortholinear keyboard with a 19mm trackball in the right half, 17mm narrow key pitch, Choc v2 hot-swap sockets, and ZMK firmware over Bluetooth or USB.
TrackballsA 2.4GHz wireless, 5-button thumb trackball whose included stand sets the tilt angle to 36° or 46°.
KeyboardsA 42-key split wireless column-staggered keyboard with 17mm key pitch, a 25mm trackball and a rotary encoder, derived from the cool642tb-mini.
Vertical miceThe Nulea M504 is a wired vertical mouse with a 57-degree grip angle, four DPI levels and RGB lighting.
TrackballsA wireless trackball from Nulea with adjustable DPI, three selectable connections and a detachable base, sold at $35.99 in red, blue and purple.
KeyboardsA soldered 75% split mechanical keyboard kit running QMK/VIA whose halves can be joined with magnets and pogo pins to work as a single board.
KeyboardsA one-off, fully assembled 48-key row-staggered split keyboard with a handmade PCB and case, Bluetooth wireless and QMK firmware, listed on BOOTH as a single unit.
KeyboardsAn 85-key Alice-style split keyboard with a dedicated function row, two rotary encoders, a gasket-mounted 3D-printed PETG case, and a choice of QMK wired or RMK Bluetooth versions.
KeyboardsA wired, tenkeyless membrane ergonomic keyboard with a split-key curved layout and an integrated palm rest.
KeyboardsA wired Perixx ergonomic keyboard with a curved split-key layout, membrane switches and an adjustable tilt angle.
KeyboardsA compact wired 78-key (US layout) scissor-switch keyboard with a built-in 14 mm trackball and two USB 2.0 hub ports.
A 2.4 GHz wireless set that pairs a compact one-piece split-key keyboard with a separate numeric keypad and a silent vertical mouse, all running off a single nano USB receiver.
Vertical miceA wired, right-handed vertical mouse from Perixx with six buttons, switchable DPI and a weight of 159 g.
Vertical miceA wired vertical mouse from Perixx with six buttons and a 1000/1600 DPI switch, designed for medium to large hands.
TrackballsThe Perixx PERIMICE-517 is a wired, right-handed USB vertical trackball with a 1.34 in (34 mm) ball and seven quiet buttons.
Vertical miceA wired right-handed vertical mouse from Perixx with 6 buttons, a DPI switch and silent clicks, aimed at small to medium-sized hands.
TrackballsA wired USB thumb-operated trackball from Perixx with a tilting scroll wheel, 6 programmable buttons, 400/1600 DPI, and detachable stands that tilt it to 10 or 20 degrees.
Vertical micePerixx right-handed wireless vertical mouse with a 2.4GHz USB receiver, 6 buttons and 3 DPI levels (800/1200/1600).
Vertical miceThe Perixx PERIMICE-804 is a right-handed Bluetooth 3.0 vertical mouse with switchable DPI of 800/1200/1600.
TrackballsA seven-button wireless thumb trackball with a 34mm synthetic ruby ball that can pair with up to three devices over Bluetooth or a 2.4GHz USB receiver.
TrackballsAn open-source, 3D-printed ambidextrous trackball from Ploopy with a 1.75-inch ball, eight buttons, two scroll knobs, and QMK/VIA firmware.
TrackballsA wired, open-source, 3D-printed six-button trackball with a 1.75-inch ball, PMW3360 sensor and QMK/VIA firmware, sold assembled or as a kit.
TrackballsAn open-source, 3D-printed wired trackball with a 44 mm finger-operated ball, a scroll wheel, and QMK/VIA button customization.
TrackballsThe Ploopy Mini Trackball is a compact, 3D-printed open-source trackball with five buttons and a scroll wheel, running QMK with VIA support and sold as a kit or assembled.
KeyboardsAn assembled low-profile, fully wireless split keyboard with 44 ortholinear keys at 17mm pitch, Kailh Choc v2 support and ZMK firmware, with each half running on a single AAA battery.
TrackballsA symmetrical, USB-connected accessibility trackball with a 63mm free-running ball, integrated wrist support and three-level anti-tremor settings.
KeyboardsA one-piece wireless keyboard with a curved split key layout, a fixed hard palm rest and a separate numeric keypad, using scissor switches and switching between up to three devices over 2.4GHz or Bluetooth.
KeyboardsA foldable Bluetooth keyboard with a 166° V-shaped split layout, scissor switches and pairing for up to three devices.
A grip-less vertical optical mouse with an integrated wrist guide, offered in left- and right-hand versions, with USB connection and three buttons.
Vertical miceAn ambidextrous vertical mouse whose wave mechanism switches between left- and right-handed use in one movement, with a break-reminder LED.
Vertical miceA budget right-handed vertical mouse with a 39° grip angle, 2.4GHz USB-receiver connection, five DPI steps up to 4000, and a single AA battery.
KeyboardsA 48-key wireless split ortholinear keyboard with 24 keys per half, sold assembled on BOOTH with Hades low-profile switches and 3D-printed keycaps.
KeyboardsThe Sol 3 is RGBKB's split keyboard kit with 72 MX hotswap keys and full RGB lighting, built without soldering apart from the optional rotary encoders.
TrackballsA wireless thumb-operated trackball with 0°/18° adjustable tilt, three-device switching via dual Bluetooth and a 2.4G USB receiver, and USB-C rechargeable battery.
Vertical miceSanwa Supply wireless mouse with a side wheel and fast-scroll wheel, switching among three devices via two Bluetooth pairings and a 2.4GHz receiver.
Vertical miceA tilted 8-button ergonomic mouse with a top-mounted LCD showing battery, connection mode, DPI and report rate, supporting 2.4GHz wireless, Bluetooth and wired USB.
Vertical miceA rechargeable 5-button silent ergonomic mouse with a 54° tilt that connects over Bluetooth 5.0 or a 2.4GHz USB receiver.
Vertical miceA rechargeable vertical mouse with a thumb-side dial for six switchable functions such as horizontal scroll and zoom, a small LCD status screen, and wired, 2.4GHz and Bluetooth connections.
Vertical miceSanwa Supply's wired, silent, antibacterial ergonomic mouse with 5 buttons, a Blue LED sensor and switchable 1000/1600 count resolution.
Vertical miceSanwa Supply's antibacterial, silent 2.4GHz wireless ergonomic mouse with five buttons, designed to be used with the hand placed lightly from the side.
TrackballsA wired USB trackball with a roughly 44 mm ball operated by the index and middle fingers, with five silent buttons.
TrackballsA right-handed, thumb-operated wireless trackball from Sanwa Supply with a tilted body, 34mm ball, five buttons, a tilt wheel, and a 2.4GHz USB receiver.
TrackballsA compact thumb-operated Bluetooth trackball with a 32 mm ball and a mouse-like shape, aimed at smaller hands and first-time trackball users.
Vertical miceA right-handed 57° vertical mouse with a built-in palm rest, 2.4GHz wireless via USB-A and Type-C receivers, a rechargeable battery and silent clicks.
Vertical miceA right-handed 58° vertical wireless mouse with Bluetooth 5.0 and 2.4GHz USB dual-mode connection for two devices, plus a built-in jiggler mode.
Vertical miceA right-handed 45° vertical gaming mouse with 10 programmable thumb buttons, tri-mode connectivity (2.4G, Bluetooth 5.0, USB-C wired) and a 97 g body.
KeyboardsThe Halcyon Ferris from splitkb.com is a 34-key split keyboard with hot-swappable Choc low-profile switches, supporting wired (QMK/Vial) or wireless (ZMK) controllers.
KeyboardsHallie is a 42-key wireless low-profile split keyboard from Ukrainian maker splitted.space, using the Corne Choc layout, hot-swappable Kailh Choc v1 switches, ZMK firmware and a rotary encoder in each half.
KeyboardsA 62-key wireless split mechanical keyboard based on the Sofle v2.1 layout, with two rotary encoders, RGB lighting and ZMK firmware.
KeyboardsA fully assembled low-profile split keyboard based on the Sofle Choc form factor, with 58 hot-swappable Choc keys, two rotary knobs and QMK firmware with VIAL support.
KeyboardsA Hall effect split keyboard with a 4x6 column-staggered layout and 3 thumb keys per half, configured through Vial with HE features.
KeyboardsA 38-key ortholinear wireless split keyboard running ZMK on AAA batteries, with a built-in 19 mm trackball and 17 mm-pitch hot-swap sockets for Choc V2 switches.
KeyboardsA 46-key wireless split ortholinear keyboard running ZMK on AAA batteries, with 17mm narrow key pitch and a 19mm trackball built into the right half.
KeyboardsA wired, ortholinear, low-profile split keyboard with 47 Choc v2 keys and a built-in 25mm trackball; it ships assembled, but you supply your own switches and keycaps.
KeyboardsDogTag is a 9-key reversible macro pad kit that can be used as a split pair by linking two units with a TRRS cable.
Vertical miceThe TECKNET MS014 is a wired USB vertical mouse with silent clicks and four DPI levels (up to 6400), suited to medium to large hands.
KeyboardsA wireless 37-key low-profile split keyboard with column stagger, a built-in 25mm trackball and ZMK firmware, sold assembled without switches, keycaps or trackball.
The Truly Ergonomic CLEAVE is a wired USB keyboard with a split, symmetrical, columnar layout and optical infrared mechanical switches in an aluminum body.
Vertical miceThe UGREEN M571 (55916) is a right-handed vertical mouse with a 57° angle, connecting through a 2.4GHz USB dongle, with up to 4000 DPI and quieter clicks.
Vertical miceThe UPLIFT Swell is a right-handed wireless vertical mouse sized for small to medium hands, with a 2.4 GHz connection, built-in rechargeable battery and fixed 1600 DPI.
Vertical miceThe UPLIFT Desk Wave is a 2.4GHz wireless vertical mouse sold in right- and left-handed models, with five buttons, a scroll wheel and 800/1200/1600 DPI switching.
KeyboardsA 39-key column-staggered split keyboard kit with a built-in 34mm thumb-operated trackball.
Vertical miceThe Zelotes F-36 is a vertical wireless mouse with 8 buttons and dual Bluetooth/2.4GHz connectivity, weighing about 110 g.
KeyboardsA 40% wireless split keyboard with row-staggered 19 mm-pitch keys, a 25 mm trackball and a rotary encoder, running ZMK on AAA batteries and sold as an assembled body.
KeyboardsThe ZSA Voyager is a wired, 52-key low-profile split keyboard with a columnar layout, hot-swappable Kailh Choc switches and QMK firmware.
KeyboardsThe ZUOYA GMK70 is a split, gasket-mount mechanical keyboard with hot-swap sockets and QMK/VIA support, connecting by wire, Bluetooth or 2.4 GHz.
KeyboardsA 62-key 60% split keyboard aimed at users coming from JIS layouts, with hot-swap sockets, no soldering needed, and Vial support.
Vertical miceA small, rechargeable 2.4GHz wireless ergonomic mouse from Sanwa Supply's FREERO series, with silent buttons and five buttons.
KeyboardsJITRA is an assembled 65-key, 60% JIS-layout wireless split keyboard with a 25mm trackball and a rotary encoder, running ZMK.
KeyboardsA 50-key, 17mm-pitch wireless split keyboard derived from the Corne/Cornix layout, with Choc v2 low-profile switches, a 19mm trackball, and AAA battery power.
KeyboardsA 50-key, 17 mm-pitch low-profile wireless split keyboard based on the Corne/Cornix layout, shipped assembled with a 19 mm trackball module; Choc v2 switches must be supplied by the buyer.
KeyboardsA 65-key split Bluetooth-only keyboard with a 14mm trackball and rotary encoder, using sockets for Choc V2 and Gateron Low-profile 3.0 switches.
KeyboardsA pre-assembled, ultra-thin column-staggered 40% split keyboard that uses mouse micro switches as key switches, under 9mm at its thickest.
KeyboardsA very small split keyboard kit with 48 keys at 0.8U (16 mm) pitch, 64 × 96 mm per half, built with MX-compatible switches and running QMK with VIA support.
Vertical miceA vertical mouse with a 59° tilt, Bluetooth 5.2 and 2.4GHz dual-mode connectivity, and a 3-in-1 side scroll wheel.
Acer's right-handed vertical wireless mouse with a 2.4 GHz connection, 6 buttons and a 1600 DPI optical sensor.
A wireless 2.4 GHz trackball with a claw-grip body and a large fingertip-operated ball, offering fully programmable buttons and five DPI levels from 400 to 4800.
KeyboardsA four-row, fully split aluminum gasket-mount keyboard designed by ai03, with a hotswap PCB and QMK/VIA support.
KeyboardsA five-row, fully split, gasket-mounted aluminum keyboard designed by ai03, with a hotswap PCB and QMK/VIA support.
KeyboardsA 46-key column-staggered unibody DIY keyboard with a central 34mm trackball, rotary encoder and OLED.
Vertical miceNo usable product information was available for the AOC MS610, so its specifications could not be confirmed.
Vertical miceA vertical wireless mouse held in a handshake posture, with a top LCD showing connection mode, battery level and DPI, and support for 2.4GHz and Bluetooth 5.0.
An ErgoDox-inspired, column-staggered split keyboard designed and made by Arrow Mechanics in Kraków, with 94 low-profile hot-swap sockets and QMK firmware.
TrackballsA DIY trackball mouse kit running ZMK Firmware with a 55mm index-finger-operated ball, supporting up to 8 MX-compatible keys plus a rotary encoder.
KeyboardsA 63-key split, column-staggered DIY keyboard kit (v2) driven by a single Raspberry Pi Pico, hotswap with both Choc and MX switches.
KeyboardsA 58-key column-staggered split keyboard DIY kit with a reduced right half, designed to leave room for a mouse or trackpad beside the right hand.
A wired right-handed vertical mouse with a simple layout of two buttons and a scroll wheel, and a fixed 1500 DPI.
KeyboardsA 56-key split DIY kit with a concave keywell and an integrated thumb trackball, running QMK and accepting MX-style switches.
KeyboardsA prebuilt compact split ergonomic keyboard with a 34mm trackball, hotswap Choc V1 sockets and QMK firmware.
TrackballsA 40-key QMK keyboard with a built-in 38mm trackball, sold as an assembled board that needs your own MX-compatible switches and keycaps.
KeyboardsErgo42 is a DIY split keyboard kit by Biacco42 with two 4×7 ortholinear halves (56 keys in total), running QMK firmware over a wired USB connection.
KeyboardsSPLITEN is a split 40% DIY keyboard kit with a modified ortholinear layout designed around numpad use, a rotary encoder per half, a laminated acrylic case, and QMK firmware with REMAP support.
The CHERRY MW 4500 is a wireless vertical mouse with a 45° angle and a USB nano receiver, also offered in a left-handed version.
KeyboardsA full-size mechanical split keyboard with Kailh Box switches, whose split distance, angle and tilt can be adjusted.
KeyboardsA fully split, wired USB keyboard with a standard QWERTY layout that lets you adjust splay (0–30°), slope (6°/12°) and side tilt (0°/10°/16°) for each half.
An ambidextrous wired USB desktop trackball from Cursor Controls with a 38 mm optical ball, a capacitive scroll ring for vertical and horizontal scrolling, and five main buttons.
KeyboardsA made-to-order split keyboard with a curved keywell whose key positions are tailored to each buyer's hands from photos and a biomechanical model.
KeyboardsAn open-source curved split keyboard derived from the Dactyl and Manuform designs; the 6x7 is a large variant, sold on AliExpress as a wired, Vial-compatible kit.
A wireless vertical mouse with an OLED display and magnetic palm rest, supporting Bluetooth 4.0/5.0 and 2.4G.
KeyboardsA battery-powered wireless split column-staggered ZMK keyboard with 42 keys and an index/middle-finger trackball, based on roBa.
KeyboardsAn open-source, wireless-only 34-key split keyboard by duckyb, derived from the Sweep/Swoop and built around ZMK, nice!nano controllers and Kailh Choc v1 hot-swap sockets.
KeyboardsA fully split, row-staggered mechanical keyboard with eight thumb keys and hot-swap MX/Choc sockets; built-in 0–60° tenting and USB/Bluetooth/RF wireless are paid add-ons.
KeyboardsA wired 60% split mechanical keyboard with QMK support, hot-swap sockets, an RGB knob and a metal case.
TrackballsA wireless thumb-operated trackball with a roughly 34 mm ball, connecting via a 2.4 GHz USB receiver, with 6 buttons, a tilt wheel and switchable 750/1500 count resolution.
TrackballsA handheld, ambidextrous 10-button trackball that connects over a 2.4GHz USB receiver, built for use away from a desk, such as from a sofa or bed.
KeyboardsA 36-key split ortholinear DIY keyboard kit for Cherry MX-compatible switches, built by soldering all-surface-mount parts yourself.
KeyboardsA 36-key wireless split keyboard that shrinks the K:04, with swappable trackball, touchpad or encoder modules on either half.
KeyboardsErgohaven's 36-key, 40%-size wireless split keyboard with hotswap sockets and ZMK firmware, with its design files published as open source.
KeyboardsA split 58-key keyboard with a curved 3D-printed case and hot-swap modules that accept a trackball, touchpad or encoder on either half.
KeyboardsA 40-key wired split keyboard with a curved 3D-printed case and MX hot-swap sockets; a trackball, touchpad or encoder module can be fitted to either half.
KeyboardsThe Ergohaven Space Mission 62 is a wired, gaming-oriented split keyboard with 62 low-profile Gateron KS-33 switches in hot-swap sockets and a color IPS display on each half.
KeyboardsThe EKBOX is a wired 36-key split keyboard with a thumb trackball, spring gasket mount, hotswap Choc v1/v2 sockets and a 1.4-inch TFT display.
KeyboardsA Corne split keyboard in an anodized CNC aluminum case with a pre-assembled PCB, offered with Cherry MX or Choc sockets and as a wired (QMK/Vial) or wireless (ZMK) build.
KeyboardsA compact 5-column mini Corne split keyboard for Choc low-profile switches, available as a wired (QMK/Vial) or wireless (ZMK) build.
KeyboardsA Sofle-based split keyboard with a case CNC-milled from solid anodized aluminum, Choc v1/v2 hot-swap sockets, and ZMK firmware with ZMK Studio support in the wireless version.
KeyboardsA wireless split keyboard derived from the Totem, with an aluminum case, hot-swap Choc V1 sockets and ZMK firmware on XIAO BLE controllers.
KeyboardsA wireless split keyboard that extends the Totemist to six columns, with an aluminum case, Choc V1 switches and ZMK firmware.
Vertical miceA right-handed vertical wireless mouse that connects through a 2.4 GHz mini receiver, with five buttons and four-level pointer speed switching.
KeyboardsA low-profile, split Corne-style keyboard sold by MetaKeebs; the supplied page gives few specifications beyond its name.
KeyboardsThe Eyelash Sofle is a split keyboard listed by MetaKeebs, but the supplied page gives no detailed specifications for it.
KeyboardsA 70-key column-staggered split keyboard handmade to order in Poland, offered in a wired VIAL version or a wireless ZMK version.
KeyboardsThe Corne is foostan's open-source split keyboard with 3x6 column-staggered keys and three thumb keys per half; V4 puts an RP2040 on the PCB and has hot-swap sockets.
TrackballsA right-handed gaming trackball with a PixArt PAW3335 sensor and 44mm ball, offering USB, 2.4GHz wireless and Bluetooth, in a red limited-edition body.
Vertical miceA wired vertical mouse for right-handed users, adjustable into six configurations with interchangeable palm prolongers and upper adapters.
TrackballsA wired, assembled add-on trackball bar with a scroll wheel, designed to be used alongside an existing keyboard.
KeyboardsAn ErgoDox-inspired split mechanical keyboard that connects only over a 2.4 GHz receiver, with hot-swap sockets and VIAL support, sold without switches or keycaps.
KeyboardsA 66-key ErgoDox-inspired split keyboard that connects only via 2.4 GHz receiver, with hot-swap sockets for MX or Gateron low-profile switches and Vial remapping.
Vertical miceThe J-Tech Digital V628ML is a left-handed wireless vertical mouse using a 2.4GHz USB receiver, with 6 buttons and designed for smaller hands.
KeyboardsA foldable, flat unibody split keyboard with scissor keys and Bluetooth connection to up to three devices, aimed at portable use.
KeyboardsA made-to-order, 3D-printed Dactyl split keyboard with hot-swap MX sockets, where you pick the rows, columns and thumb cluster; the wired version runs QMK/Vial on an RP2040 and the Bluetooth version runs ZMK.
KeyboardsA 110-key USB wired ergonomic keyboard with a cushioned wrist rest, listed on AliExpress.
KeyboardsAn open-source 58-key column-staggered split keyboard kit by kata0510, with 6×4 main keys plus 4 thumb keys per half and a TRRS link between the halves.
KeyboardsAn open-source 60% Alice-style ergonomic keyboard kit by kb-elmo, built only from through-hole parts and using MX-compatible switches, an FR4 plate and a USB-C connection.
TrackballsA DIY dual-trackball mouse kit with a 44mm main ball, a 19mm sub ball and a 1.28-inch round touch display, also sold pre-assembled; balls are not included.
KeyboardsA fully split, column-staggered low-profile keyboard with a 4x6 grid plus four thumb keys per half, Kailh Choc V1 hotswap sockets, tighter 17x18mm spacing, and QMK/VIA firmware.
KeyboardsThe Iris LM-G is the Gateron KS-33 low-profile variant of Keebio's fully split Iris LM, with a 4x6 column-staggered grid and four thumb keys on each half.
KeyboardsKeebio's Levinson is a 40% fully split ortholinear PCB kit with a 4x6 grid per half, built with through-hole soldering (Rev. 3, now discontinued).
KeyboardsA 5x12 split ortholinear keyboard kit (Rev. 5) with an RP2040 controller, MX hotswap sockets, per-key RGB, and VIA support, whose bottom row can be snapped off to make a 4x12 Levinson-style 40% layout.
KeyboardsKeebio's low-profile split keyboard in a familiar row-staggered 65% layout (optional macro section), with Choc V2 hotswap sockets, aluminum case, and QMK/VIA firmware.
KeyboardsA fully split, row-staggered 75%/80% (TKL-style) keyboard from Keebio with function and macro keys, QMK/VIA support, and both pre-built and DIY kit options.
A 75% Alice-layout aluminium keyboard with QMK/VIA support, hot-swap sockets and a programmable left-side knob.
KeyboardsA split keyboard running QMK with Vial, featuring a PCB gasket mount, hot-swap on both halves, a display, and control modules such as a trackball and touchpad.
A preassembled 58-key split keyboard based on the Lily58, with ZMK firmware, Bluetooth 5.0 and USB-C, and optional power from six removable AAA batteries.
The original two-handed Maltron ergonomic keyboard: a wired USB model with 112 keys and CHERRY MX Brown switches.
A two-handed Maltron 3D keyboard with a built-in central trackball, Cherry MX switches and a USB connection.
KeyboardsA DIY 47- or 48-key symmetric staggered keyboard by marksard that works with standard ANSI 104 keycaps.
KeyboardsA solder-free, fully wireless split 50-key ortholinear keyboard kit using Kailh Choc V2 switches and ZMK firmware, with a roller volume control.
KeyboardsA low-profile split keyboard in the Sofle family sold by MetaKeebs; the retrieved page gives no detailed specifications.
KeyboardsA 61-key aluminium-alloy split mechanical keyboard with QMK/VIA support, sold through AliExpress.
TrackballsNakabayashi's Digio2 Bluetooth ergonomic optical trackball with five silent buttons, sold in black and white.
A compact five-button thumb-operated trackball with a 34 mm ball that connects over Bluetooth 3.0.
A compact 5-button thumb-operated trackball with a 34mm ball, quiet buttons, and a 2.4GHz USB receiver connection.
Vertical miceA wireless vertical mouse with a 55° angle, a 2.4GHz USB receiver and two AAA batteries.
TrackballsThe Nulea M514 is a vertical, thumb-operated wireless trackball that connects to up to 3 devices over Bluetooth or a USB receiver and is rechargeable.
Vertical miceA low-cost rechargeable wireless vertical mouse with a pinky rest, Bluetooth and 2.4 GHz dual-mode connectivity, silent clicks and four DPI steps from 800 to 2400.
TrackballsA wired USB X-keys XBE series device combining a 38.1 mm trackball with 12 programmable, RGB-backlit keys.
KeyboardsA 70% wireless split keyboard running ZMK, with optional modules for a trackball, scroll wheel and OLED.
KeyboardsA wired membrane ergonomic keyboard with a fixed split design in three key clusters, an integrated palm rest and backlighting.
A wired tenkeyless ergonomic mechanical keyboard with a split keyframe, curved design, integrated palm rest and Kailh low-profile switches.
KeyboardsA wired USB mini keyboard with scissor switches, a built-in trackball with two mouse buttons, and white/red LED backlighting.
KeyboardsA wired compact membrane keyboard with a built-in 14 mm optical trackball and two extra USB ports.
KeyboardsA full-size wired USB keyboard with a curved, low-profile shape, scissor switches and a magnetic detachable wrist rest.
KeyboardsA wired ergonomic keyboard with a split keyframe, curved design and low-profile Kailh mechanical switches.
KeyboardsA wired full-size ergonomic keyboard with a one-piece split, curved key layout, Kailh low-profile mechanical switches, an integrated palm rest and negative tilt options.
KeyboardsThe Perixx PERIBOARD-636 is a compact wireless ergonomic keyboard with a wave-shaped split design, integrated number pad and a 2.4GHz receiver.
Vertical miceA wireless vertical mouse powered by two AAA batteries that connects over a 2.4 GHz receiver or Bluetooth, pairs with up to three devices, and has three DPI settings from 800 to 1600.
TrackballsA small, buttonless, open-source 3D-printed trackball kit from Ploopy with a 1.5-inch ball on roller bearings, an ADNS-5050 sensor, a USB Micro-B connection and QMK firmware; it must be soldered together by the buyer and has since been replaced by the Nano 2.
An open-source, 3D-printed thumb-operated trackball with a PMW-3360 sensor, Omron D2LS-21 switches, a 1.5-inch ball and QMK/VIA firmware.
TrackballsA tiny open-source USB trackball board from Prokyber built around the CH32V003 MCU, with RGB backlight, sold without an enclosure.
The R-Go Tools HE Mouse is a wired USB vertical mouse sold in right-hand (medium/large) and left-hand (medium) versions, with customisable buttons.
The R-Go HE Sport is a Bluetooth vertical ergonomic mouse that holds the hand at about 80°, comes in left- and right-handed versions, and uses a built-in rechargeable battery.
Vertical miceThe Rapoo EV250 is a right-handed vertical wireless mouse with a 2.4 GHz dongle, silent clicks, 3 buttons and an adjustable 1600 DPI sensor.
KeyboardsRazer's first wireless split ergonomic keyboard, with a curved full-size layout, low-profile scissor membrane keys, a fixed wrist rest, a command dial and macro keys.
KeyboardsA one-piece 41-key column-staggered 40% DIY keyboard by gtips with angled halves and a small thumb row, running QMK on a Pro Micro-compatible controller.
Vertical miceA 2.4GHz wireless vertical ergonomic mouse from Sanwa Supply with a blue LED sensor, 5 buttons and switchable 1000/1600 count resolution.
Vertical miceThe Sanwa Supply 400-MA127 is a rechargeable, right-handed ergonomic mouse with five buttons, silent clicks and a blue LED sensor, connecting through a 2.4GHz USB receiver.
Vertical miceSanwa Supply's vertical wireless mouse with Bluetooth 5.1 and a 2.4GHz USB-A receiver, 5 buttons, about 106 g, USB-C rechargeable, and a display space under the cover for small figures.
Vertical miceSanwa Supply's 400-MAWB234 is an 8-button ergonomic wireless mouse with a status display, connecting via Bluetooth or 2.4GHz receivers.
Vertical miceA wireless ergonomic mouse with a shape meant to keep the wrist from twisting, offering a tilt wheel for horizontal scrolling, free-spin fast scrolling, and switching between three devices (two over Bluetooth, one via 2.4GHz receiver).
Vertical miceA vertical wireless mouse from Sanwa Supply with Bluetooth and 2.4GHz receiver connection, six assignable side buttons and a small LCD showing battery and connection status.
Vertical miceA 5-button silent BlueLED mouse that connects over Bluetooth or a 2.4GHz receiver and charges wirelessly on Qi/MagSafe pads.
A mid-size wired vertical mouse tilted at 41°, with back/forward side buttons and a 1000/1600 DPI switch.
Vertical miceAn antibacterial, silent-switch Bluetooth ergonomic mouse with a side-grip shape, five buttons and two AAA batteries.
Vertical miceA rechargeable ergonomic mouse with Bluetooth and 2.4GHz wireless, quiet switches on every button, and a choice of 58 mm or 45 mm tall bodies.
Vertical miceA 62 g rechargeable ergonomic mouse with five silent buttons that switches between Bluetooth and 2.4GHz wireless.
KeyboardsA soldered DIY kit for a 44-key, column-staggered split keyboard with a 34 mm thumb-operated trackball built into one half.
KeyboardsA fully assembled, wireless split 40% column-staggered keyboard running ZMK, built on Kailh PG1613 ultra-low-profile switches with each half 9 mm thick.
KeyboardsSplit TKL keyboard designed by Syryan with fixed tenting at different angles per half (4° left, 2.7° right) and QMK firmware on an RP2040, sold as a CannonKeys group buy.
KeyboardsA 40-key wireless ortholinear split keyboard running ZMK with a 19mm trackball on each half, sold assembled.
KeyboardsA 62-key split keyboard with aggressive column stagger, a number row and a 7-key arc-shaped thumb cluster per half; sold as a pre-soldered, hot-swap PCB that you assemble without soldering, using wired (QMK/Vial) or wireless (ZMK) controllers.
KeyboardsThe Kyria rev3 is a 40% split keyboard PCB kit with 50 keys, an aggressive column stagger, a large thumb cluster, and QMK or ZMK firmware support.
KeyboardsA Datahand-style keyboard with 50 magneto-optical 20g keys, fully adjustable per-finger fitment and optional integrated trackball, touchpad or trackpoint pointing.
KeyboardsA hotswappable split Dactyl Manuform keyboard with a 3D-printed case from TaikoHub, offered in three sizes by thumb cluster.
KeyboardsA 28-key, three-dimensional one-handed DIY kit with swappable trackball/D-pad units that becomes a split keyboard when two halves are connected.
KeyboardsA compact 50-key, 3-row split keyboard sold preassembled with Choc V2 switches; it can sit on a pen display and be remapped in the browser via Remap.
A compact wired USB handheld trackball operated with the thumb, with 3 buttons, 600 dpi and a weight of about 90 g, usable while lying down.
The Trust Verto (22885) is a wired, right-handed vertical mouse with a 60-degree hand position, 6 buttons and a 1.5 m USB cable.
The Trust Voxx is a rechargeable right-handed vertical mouse with Bluetooth and a USB receiver, an LED status display and programmable buttons.
KeyboardsA 58-key split, column-staggered DIY keyboard derived from the Lily58 family, with MX-compatible hot-swap sockets and QMK/Vial support.
KeyboardsA 60% split mechanical keyboard with hot-swap sockets, Agent configuration software, optional pointing modules and flip-out feet for tenting and tilting.
KeyboardsA wireless split 80% tenkeyless keyboard with an eight-key thumb cluster, integrated wooden palm rest and OLED display, connecting via USB, Bluetooth LE or a dongle.
KeyboardsA 75% split keyboard in an aluminum case with wired and Bluetooth connectivity and a scroll wheel, sold as a hot-swap barebones without switches or keycaps.
KeyboardsA compact 3x5 low-profile split keyboard with a built-in trackball, hot-swappable Choc V2 switches, ZMK firmware, Bluetooth, and AA battery power.
KeyboardsAn 89-key split mechanical keyboard with VIAL firmware, full MX hot-swap, and a choice of 2.4GHz wireless or wired versions.
KeyboardsA unibody 65% wireless mechanical keyboard with a radial-columnar layout, hot-swappable sockets and QMK-based firmware.
A wired 87-key ergonomic mechanical keyboard with hot-swappable Gateron optical brown switches and an aluminum body.
KeyboardsA budget wired mechanical X-Bows keyboard in a single-piece body, with radial key columns, a central thumb cluster, and an aluminum top over an ABS chassis.
KeyboardsThe X-Bows Nature is a wired, hot-swappable mechanical keyboard with a radial-columnar layout and a central thumb cluster, supporting QMK/VIA/VIAL.
KeyboardsA 62-key column-staggered split keyboard kit that keeps the Ergo The End layout and adds optional rotary encoders and LEDs.
KeyboardsA 61-key column-staggered split keyboard kit that puts a 34mm trackball by the thumb keys.
Vertical miceThe Zelotes F-36A is a 2.4G wireless vertical mouse with 6 buttons and adjustable DPI up to 2400.
KeyboardsThe ZSA Moonlander Mark I is a wired USB-C, fully split 72-key columnar keyboard with an articulating thumb cluster, hot-swap sockets and QMK firmware configured through Oryx.
TrackballsA magnetic trackball add-on for the ZSA Voyager split keyboard that turns keys into mouse actions, offered in left- and right-hand versions.
KeyboardsA 49-key column-staggered 40% unibody keyboard kit with a central trackpad and a large clickable wheel.
KeyboardsA 36-key split ortholinear DIY keyboard kit for Kailh low-profile switches, running QMK firmware.
KeyboardsA made-to-order split 60% keyboard with five rows, narrow key pitch and 9% tenting, using Choc V2 switches and Vial-editable keymaps.
KeyboardsAn assembled, row-staggered split wireless keyboard running ZMK, with a built-in 19mm trackball (PMW3610 sensor) and standard key pitch.
KeyboardsA solder-free 44-key column-staggered split keyboard kit whose halves are linked by an HDMI cable and driven by a single RP2040, with QMK firmware and Remap support.
TrackballsTinyTB is a credit-card-sized, 6-key wireless DIY trackball kit built on a XIAO BLE and a PMW3610 sensor, with ball cases for 12mm and 25mm balls.
KeyboardsA 70-key split low-profile solder kit using Kailh Choc V1 switches, with a layout close to a standard US keyboard and thumb keys.
KeyboardsA split DIY keyboard kit with a 5-row, 64-key grid layout, built for Kailh low profile and Choc V2 switches.
KeyboardsThe Reex56 is a 56-key, 60% split DIY keyboard kit that needs soldering, with QMK firmware, Cherry MX-compatible hot-swap sockets and a bearing-supported trackball that can go in any of six positions.
KeyboardsA 42-key column-staggered split DIY kit with 0.8U key pitch for Choc low-profile switches, running QMK and supporting VIA.
KeyboardsA tiny 48-key split DIY keyboard kit using Choc low-profile switches, with each half measuring just 64 x 96 mm.
KeyboardsA split DIY keyboard kit that reproduces the HHKB Japanese (JIS) layout, running QMK/VIA with swappable MX switches.
KeyboardsA wireless split DIY keyboard kit with a JIS layout, a 75% layout including F-keys, hot-swap sockets and Vial support.
KeyboardsA pre-soldered, split JIS-layout 83-key keyboard with LED bars, hot-swap sockets and Remap-based key configuration, connected by USB-C.
KeyboardsA wired, split JIS-layout keyboard with an overlapping centre-column layout, sold pre-assembled with hot-swap sockets and a rotary encoder.
KeyboardsA DIY split low-profile keyboard kit with a JIS layout and 75% layout including F-keys, supporting Choc v2 and Gateron LP 2.0 switches.
KeyboardsA wireless, split, ortholinear DIY keyboard kit with a 25mm index-finger trackball and an OLED, powered by AAA batteries.
The Acer Smart Fit Vertical Mouse (HP.EXPBG.020) is a right-handed wireless vertical mouse, but the supplied pages contained no specification text.
The Adesso iMouse E20 is a right-handed vertical laser mouse that connects over 2.4 GHz wireless with a USB receiver.
A compact 2.4 GHz wireless ergonomic keyboard and vertical mouse set from Adesso with a split key design and integrated palm rest.
KeyboardsA 36-key column-staggered DIY keyboard kit with a 34mm trackball and scroll ring mounted in the center of a single board.
KeyboardsA DIY kit for a 48-key ortholinear split keyboard with two 4×6 halves, built around the RP2040-Zero and connected over USB Type-C, with a choice of tilt or tent plates.
The Evoluent3 is a wired, right-handed vertical mouse with a lip that supports the little finger, five buttons including the scroll wheel, and four DPI settings.
The Scylla is a 3D-printed split keyboard with a keywell and column stagger, using the 6x4+5 Dactyl Manuform Mini layout and running QMK firmware.
KeyboardsA 58-key column-staggered split DIY keyboard based on the Lily58 Pro, with Gateron low-profile hotswap sockets and wired or wireless builds.
KeyboardsA 42-key wireless split keyboard based on the Piantor/Cantor layout, with a 40mm circular trackpad built into the right half, ZMK firmware and hot-swappable Choc v1/v2 sockets, sold as a DIY kit or pre-soldered.
KeyboardsA 42-key wireless split keyboard based on the Cantor (Piantor) layout with Kailh Choc switch support and an integrated Azoteq TPS43 multi-touch trackpad, sold as a DIY kit or pre-soldered board.
KeyboardsA DIY 40% row-staggered keyboard kit running QMK that can be used as a TRRS-cabled split or as a unibody joined by magnetic pogo pins.
KeyboardsA DIY kit for a 40-key split, column-staggered, low-profile ZMK keyboard with slight tenting; the PCBs are supplied and the case must be 3D printed separately.
KeyboardsThe Cheapino V2 is a wired split DIY keyboard kit with QMK/Vial support, sold pre-soldered.
KeyboardsAn open-source 40-key, 4×10 ortholinear low-profile wired keyboard kit using Choc switches, with a 1.8" LCD between the two key halves and a Raspberry Pi Pico controller.
KeyboardsA wireless split low-profile (Choc v2) keyboard build kit with a 25mm trackball and touch sensors, running ZMK.
KeyboardsDYA2 is a wireless split 60% build-kit keyboard for desktop use, with a trackball on the right half and touch sensors on the keycaps.
An IP65-sealed freestanding desktop trackball from Cursor Controls with a 38 mm ball, hall-effect scroll wheel, left/middle/right switches and wired USB/PS/2 output, aimed at medical, marine and industrial use.
KeyboardsA 36-key DIY split keyboard kit designed by CyanDuck with a Kyria-style column stagger, MX or Choc V1 hotswap sockets, dual encoder support and vertical OLEDs.
KeyboardsAn open-hardware split keyboard published by Tom Short in 2017, with curved keywells, a thumb cluster and a built-in tent, usually built yourself in a 3D-printed case.
KeyboardsA hot-swap DIY Alice-layout keyboard kit with function keys, designed for people trying Alice layouts for the first time.
KeyboardsAn open-source DIY 36-key split keyboard that uses low-profile Choc switches and one RP2040-Zero controller in each half.
KeyboardsAn open-source 34-key split keyboard derived from the Ferris that uses a daughterboard controller such as a Pro Micro or nice!nano, with the Choc v1 Sweep 2 as the recommended version.
KeyboardsA wireless split keyboard with a 19mm trackball on the right half and AAA battery power, sold as a pre-soldered body that needs a user-supplied controller, switches and keycaps.
TrackballsELECOM's wired USB thumb-operated trackball with five buttons, a precision-slowdown switch and a tilt wheel; now discontinued.
The Ergoguys Comfi II EM011 is a wired USB optical ergonomic mouse with five buttons and a switchable 800/1200/2000 DPI setting.
A 58-key wireless split keyboard with a column-staggered layout that accepts trackball, touchpad, or rotary encoder modules on the inner edge of either half.
KeyboardsA split mechanical keyboard from Taiwan's ErgoKB that builds on the Ergodox, adding dual controllers, USB-C and hot-swap sockets.
KeyboardsMint60 is a 66-key split solder-it-yourself kit with a standard row-staggered layout and arrow keys, built on an acrylic case.
Fellowes' right-handed medium vertical mouse with a 60° grip angle, Bluetooth, dongle or wired connection, and a rechargeable battery.
A small right-handed vertical mouse from Fellowes with a 60° angle, rechargeable battery, and Bluetooth, dongle or wired connection.
KeyboardsA 40-key column-staggered unibody split keyboard PCB with a 25-degree angle per half, hotswap sockets, and MX or Choc versions, sold as a DIY kit component.
KeyboardsThe fingerpunch big barobord is a 52-key column-staggered split keyboard PCB with hotswap sockets and an aggressive 25-degree angle per half.
KeyboardsA reversible split DIY keyboard PCB set from fingerpunch, based on the ffkb layout, with 42 keys or 36 once the 6th column is snapped off, MX switches soldered in rather than hotswap, and optional wireless via nice!nano.
KeyboardsA reversible, diodeless 36-key split Sweep-style PCB set for Choc switches, sold in a hotswap version and requiring Elite-C-compatible controllers.
KeyboardsThe swweeep is a wireless-only reversible 36-key split keyboard PCB for DIY builds, supporting nice!nano controllers, nice!view displays and choc switches.
KeyboardsA 58-key column-staggered split keyboard PCB with an RP2040 on each half and VIK module support, sold as a PCB only.
KeyboardsA DIY split column-staggered PCB with 36 or 42 keys, onboard RP2040 controllers, hotswap sockets for MX, Choc v1 and Gateron low-profile switches, and support for a 34mm trackball or Cirque trackpad.
The gboards Georgi is a compact split keyboard, but the only page provided (a QMK 404 page) contains no specifications, so details are unverified.
KeyboardsAn open-source 38-key column-staggered low-profile split keyboard by GEIGEIGEIST, running ZMK wirelessly on a XIAO BLE or QMK/VIAL wired on a XIAO RP2040.
KeyboardsA 36-key wireless ortholinear split DIY keyboard designed by Germain Gadel, built on Seeed XIAO BLE controllers and ZMK firmware.
KeyboardsHitsuki46 is a wireless split DIY keyboard kit with an ortholinear layout curved like a fan; builders source parts and 3D-print the case themselves.
KeyboardsSoa39mini is a DIY kit for a split wireless 17mm-pitch Grin-layout keyboard with a 12mm thumb trackball on the right half.
KeyboardsSoa44 is a 44-key wireless split keyboard kit with a Grin layout and a 25mm trackball under the right thumb.
KeyboardsA prototype PCB kit for a split 60% Hall-effect keyboard derived from HE60, with rapid trigger configurable in hmkconf and an optional 25mm trackball add-on.
KeyboardsA 34-key compact ergonomic DIY keyboard kit designed by gtips, using a Pro Micro-compatible controller.
KeyboardsAn open-source 39-key, one-piece split keyboard by gtips with a column-staggered layout and hotswap sockets, sold as a DIY kit or pre-assembled.
KeyboardsA DIY 48-key split keyboard kit (24 keys per half) with the curved Willow layout and an adjustable centerpiece for spacing and angle.
KeyboardsA DIY kit for a unibody 40%-size keyboard with the Willow layout, hot-swap sockets and QMK firmware.
KeyboardsA 64-key split DIY keyboard kit with the unique Willow layout shaped around natural finger movement, hotswap MX sockets and QMK support.
KeyboardsA wired, ortholinear split DIY keyboard kit with a 34mm trackball on each half, supporting Vial.
The Bastyl is a keyboard from HID Technologies, but the provided pages contain no specification details, so its specs are unverified.
KeyboardsSpan is an open-source, low-profile split keyboard with 36 keys (3x5 column-staggered plus 2u/1.5u/1u thumb keys), Choc spacing, and optional touchpad, trackpoint or trackball modules.
KeyboardsA DIY family of split, symmetric 5-column-per-hand keyboards without a number row, with 34 keys in the standard build, running QMK and supporting MX/Alps-style or Choc switches.
A USB ambidextrous trackball with a 2-inch ball, six programmable buttons and an integrated hand support, designed for users with large hands or long fingers.
Vertical miceThe Jelly Comb MV016 is a left-hand vertical mouse designed to reduce wrist strain.
KeyboardsOpen-source, column-staggered split keyboard with 6×4+5 keys per half and rotary encoder support, derived from the Lily58, Corne and Helix and usually built from a kit.
KeyboardsA DIY split ortholinear PCB kit from Keebio with breakable rows and columns, configurable from 56 to 108 keys in total (up to 54 per half).
KeyboardsA low-profile Choc split 65% keyboard from Keebio with hotswap sockets, per-key RGB and QMK/VIA; now discontinued and replaced by the Quefrency LM.
KeyboardsA discontinued DIY solder PCB kit from Keebio for a fully split 70-key ortholinear keyboard with a 5x7 grid on each half, MX/Alps switch support, and QMK/VIA firmware.
KeyboardsA 36-key column-staggered split keyboard kit with an onboard RP2040 in each half, Choc V1 switches soldered in by the builder, and VIAL firmware preinstalled.
KeyboardsA Voyager-inspired 34-key low-profile wireless split keyboard kit running ZMK firmware, with Choc V1 hot-swap sockets and magnetic tenting legs.
KeyboardsA wireless split 40-key ortholinear keyboard kit with a 1U trackball, running ZMK and requiring soldering to assemble.
KeyboardsA wireless split DIY keyboard kit with a machined solid-wood top case, 48 keys in an ortholinear layout, running ZMK with low-profile switches.
KeyboardsA wireless, split, column-staggered DIY keyboard kit by kuma with 42 keys, a built-in trackball and ZMK firmware.
KeyboardsA 66-key row-staggered split keyboard kit derived from the Redox, sold with hot-swap sockets and a copper-plate case; switches and keycaps are not included.
KeyboardsA 36-key diodeless split Choc keyboard designed by Marco, sold as a hotswap DIY kit with QMK/Vial firmware.
KeyboardsA 76-key split DIY keyboard kit with a Japanese JIS layout that requires soldering to assemble.
A 70-key, 65%-layout keyboard from Merge with a rotary encoder and an OLED screen, supported by QMK firmware.
A split 75%-layout keyboard sold by Merge, with RGB lighting, macro keys, an OLED screen and an encoder in 3D-printed PLA cases, supported by QMK.
An Alice-style layout keyboard from Merge with arrow keys, a rotary encoder and an OLED screen, supported by QMK firmware.
KeyboardsA wired 40% Alice-layout keyboard kit with hot-swap sockets and QMK/VIA support, sold without switches or keycaps.
KeyboardsThe ckb640tb (OKBall) is a prototype wired DIY split keyboard kit with 40 ortholinear keys, a trackball and a rotary encoder.
KeyboardsA DIY kit for a 40-key ortholinear split Bluetooth keyboard with a trackball, 17mm key pitch, running ZMK on a Seeed XIAO BLE.
KeyboardsA DIY 42-key split ortholinear keyboard kit (21 keys per half) that uses low-profile choc V2 switches and connects over Bluetooth.
KeyboardsA 42-key ortholinear wireless split DIY keyboard with a 25mm trackball on the right half, running ZMK with Choc V2 switch sockets.
KeyboardsThe cool650 is a DIY kit with a reversible 25-key PCB per half; two halves joined by TRRS cable or magnetic connector form a 50-key ortholinear split keyboard.
KeyboardsThe cool836pico is a 36-key, 30% Alice-layout hotswap DIY keyboard kit built around a Raspberry Pi Pico.
KeyboardsA 38-key Alice-layout DIY keyboard kit, the Bluetooth version of the cool838ax, usable wirelessly or over a cable and housed in a 3D-printed case.
KeyboardsA 38-key DIY keyboard kit in the Alice layout, using Choc low-profile switches and an RP2040-Zero, with Vial support and a 3D-printed case.
KeyboardsThe cool844 is a 44-key, 40% Alice-style DIY keyboard kit sold on BOOTH as a PCB and switch plate set.
KeyboardsA 46-key, 40% Alice-layout DIY keyboard kit that runs QMK on a BLE Micro Pro for wireless Bluetooth use, with a 3D-printed, gasket-mounted case.
KeyboardsA 47-key, 40% Alice-layout DIY keyboard kit designed by m.ki, built to fit generic GH60-style 60% cases.
KeyboardsThe cool950S is a 50% split DIY keyboard kit designed by m.ki, with a laminated acrylic enclosed case and keymap editing through REMAP.
KeyboardsA 46-key ortholinear wired low-profile keyboard kit with a central hinge that folds the halves together.
KeyboardsA DIY center-split row-staggered keyboard kit with a hinge giving 4.5° natural tenting, running ZMK on a Seeed XIAO nRF52840.
A fully assembled, Ergodox-style split keyboard with 35 keys per half, hot-swappable Flamingo linear switches, an aluminum plate and QMK support, connected over USB-C and a TRRS cable.
KeyboardsA DIY split keyboard kit built around Raspberry Pi Pico, with adjustable tenting and swappable trackball, joystick and encoder modules included.
A full-size 105-key wireless keyboard with a split, sloped layout and a built-in wrist cushion, connecting through a 2.4 GHz USB receiver.
KeyboardsThe Move65 is a split, aluminum, gasket-mount mechanical keyboard kit with tri-mode wireless and hot-swap support.
KeyboardsAn open-source DIY split keyboard inspired by the ErgoDash, using Kailh Choc v1 low-profile switches and an onboard RP2040.
The Nakabayashi Digio2 MUS-TRIF175 is a thumb-operated, 5-button trackball that connects through a 2.4GHz USB wireless receiver.
A compact, pocket-sized thumb trackball with a 34mm ball, laser sensor, five silent buttons, and a 2.4GHz USB receiver.
KeyboardsA 36-key compact unibody Alice-style QAZ keyboard PCB with per-key backlighting, a pre-mounted RP2040 and Vial firmware.
KeyboardsThe Cantor Remix is a 36-key diodeless split keyboard kit modified from the original Cantor, using Choc switches at Choc spacing.
KeyboardsA 42-key split DIY keyboard kit with a swirling, matrix-staggered key layout, supported by QMK and sold on BOOTH.
A rugged IP68-sealed desktop trackball from NSI with a 38.1 mm removable epoxy ball, infrared optical tracking, a hall-effect scroll wheel and left/middle/right buttons over USB.
An industrial-grade desktop trackball with a 57 mm ball, three buttons and a high-impact plastic housing, connecting over USB or PS/2 and meant for office, CAD/CAM and clean industrial use.
KeyboardsA through-hole DIY kit by 42. Keebs, modified from null-ll's Basketweave, with a 65% Alice-like ergonomic layout and arrow keys.
KeyboardsA 57-key low-profile unibody ergonomic keyboard kit inspired by the Reviung41, with Kailh Choc V1 hotswap sockets, sold by 42. Keebs.
KeyboardsA low-profile 40% ortholinear DIY keyboard kit with a built-in 25mm trackball and physical mouse buttons, using Choc v2 switches and ZMK over USB or Bluetooth.
KeyboardsA 36–40 key ortholinear unibody keyboard kit for MX-compatible switches, with a central 25/34mm trackball, two physical mouse buttons, ZMK firmware, and USB plus Bluetooth connectivity.
KeyboardsA 36-key low-profile split DIY keyboard kit inspired by the Fifi, with column stagger, hotswap Choc v1 sockets and ZMK firmware.
KeyboardsA DIY 46-key ortholinear split keyboard PCB with a 3-key thumb cluster per half, sized to fit the 100x100mm cheap PCB limit.
KeyboardsA wired, full-size mechanical keyboard with brown switches, RGB backlighting, two USB hub ports and a built-in 55 mm trackball.
KeyboardsA wired full-size mechanical keyboard with brown switches, a numpad, and a built-in 55 mm trackball with a tilting scroll wheel.
KeyboardsA wired USB compact ergonomic keyboard from Perixx with a wave-shaped split design, an integrated number pad and a detachable magnetic wrist pad.
KeyboardsA wired compact row-staggered keyboard with low-profile scissor keys, a built-in 14mm optical trackball, a number pad and two USB 2.0 hub ports.
KeyboardsA compact wireless ergonomic membrane keyboard with a split-key sloped layout, integrated palm rest, and Bluetooth 4.2 or 2.4GHz connection.
KeyboardsA compact wireless membrane keyboard with a built-in 0.55-inch optical trackball and left/right click buttons, connecting via a 2.4 GHz USB receiver.
KeyboardsA one-piece split, full-size wireless mechanical keyboard with Kailh low-profile switches, curved key rows and a numeric keypad.
KeyboardsA foldable, ultra-thin Bluetooth keyboard with a V-shaped split design and scissor switches.
Vertical miceA right-handed wireless vertical mouse using a 2.4GHz USB receiver, with six buttons and four selectable DPI levels.
TrackballsThe Perixx PERIPRO-801 is a vertical, thumb-operated trackball mouse with Bluetooth 5.1 connectivity, powered by two AAA batteries.
KeyboardsKoishi (miniEC) is a 36-key ortholinear, electro-capacitive split DIY keyboard kit that runs QMK firmware.
A compact, 3D-printed open-source wired trackball with a PAW-3222 sensor and a single button that triggers drag scrolling by default.
A custom split keyboard aimed at gaming, with a hotswap PCB and a wired USB-C connection.
KeyboardsA low-profile hotswap Choc version of Naoki Katahira's 58-key split Lily58 Pro, running QMK and supporting per-half OLED displays.
KeyboardsA 34-key, Choc-spaced split keyboard based on the Ferris, sold as a barebones kit with Kailh hotswap sockets and a socketed MCU daughterboard.
KeyboardsA 34-key split barebones keyboard kit based on the Ferris, with MX hotswap sockets, socketed MCU daughterboards and QMK/VIA firmware.
KeyboardsA 48-key 4×12 ortholinear low-profile Choc barebones kit designed by Pluskid, with a 1.5u split spacebar, 1.5u mod columns and QMK/VIA firmware.
KeyboardsA 44-key low-profile wireless split keyboard running ZMK, with an ortholinear layout, Choc v2 switches and 17mm-pitch keycaps, sold as a DIY kit or assembled.
KeyboardsA wireless split keyboard kit running ZMK over Bluetooth LE, with a 48-key ortholinear layout and a gasket-mounted case for low-profile switches.
KeyboardsA fully wireless split low-profile keyboard kit with a 48-key ortholinear layout at 17mm pitch, running ZMK firmware.
KeyboardsSIDE48 is a 48-key wireless ortholinear split keyboard kit with an index-finger trackball, running ZMK and using Choc v2-compatible switches.
KeyboardsA 42-key wireless split keyboard kit with an aluminum top plate, 17mm low-profile key pitch, a 25mm trackball on the right half and a horizontal rotary encoder for the left thumb.
KeyboardsAn open-source, wireless-only 36-key split keyboard derived from the Chocofi, with column stagger, Kailh Choc hot-swap sockets and ZMK firmware on nice!nano controllers.
Vertical miceThe Rapoo EV310M is a wireless vertical mouse with 6 buttons, an adjustable 800–2400 DPI sensor, and Bluetooth 3.0/5.0 plus 2.4 GHz receiver connectivity.
KeyboardsA DIY kit for a compact wireless split 40-key ortholinear keyboard with ultra low profile switches and two AZ1UBALL trackballs, running ZMK.
KeyboardsAn open-source 48-key unibody split keyboard kit from RGBKB with a curved banana-shaped case, MX hotswap sockets, per-key RGB, an RGB 4-way nav switch and Vial QMK on an RP2040; it was sold through a group buy.
KeyboardsPhobos is RGBKB's first column-staggered keyboard: a 66-key kit with MX hotswap sockets, built on the same platform as the Sol 3.
KeyboardsA 72-key split keyboard kit from RGBKB with factory-installed MX hotswap sockets, 152 RGB LEDs, and steel bottoms for an optional magnetic tenting kit.
The provided page contains no product information, so no specs could be confirmed.
KeyboardsThe 7sPro is a 63-key split keyboard kit with an HHKB-style layout and Kailh sockets for swapping switches.
KeyboardsA DIY row-staggered split keyboard kit with an HHKB-style 63-key layout plus six hidden extra switches, in a CNC aluminum case; the halves can be joined for use as a single unit.
KeyboardsA split keyboard kit with a screwless 3D-printed case for Choc v2 switches, duplicating the center-line keys on both halves and including function keys (92 keys US, 94 keys JP).
The supplied page covers MCU variants of the Thumbs Up! keyboard and does not state any specs for the Trackball V3.
KeyboardsA DIY split keyboard kit that recreates the μTRON layout with 76 NiZ EC capacitive switches, driven by two Pro Micro controllers.
KeyboardsA DIY kit for a split keyboard with the TRON minimized layout at 16mm key pitch, using low-profile Choc V2 switches.
KeyboardsA DIY split keyboard kit using the TRON layout at 16mm key pitch; 72 MX switches and two Pro Micro boards must be supplied separately.
KeyboardsA wireless-only 48-key split DIY keyboard kit with a 3D-printed sealed case and top-mount plate.
KeyboardsA wireless split 40% ortholinear ZMK keyboard with an index-finger trackball, dedicated click buttons and two rotary encoders.
The Seenda MOU-302 is a right-handed vertical wireless mouse with seven buttons and a volume knob, connecting over Bluetooth, 2.4G dongle or USB-C and rechargeable.
KeyboardsA DIY kit for a 42-key wireless split keyboard running ZMK, with a dual trackpad design.
KeyboardsA DIY kit for a 38-key wireless split ortholinear keyboard with a trackpad and encoder, running ZMK with hot-swap sockets.
KeyboardsAn open-source, low-profile 44-key column-staggered unibody keyboard with Kailh Choc switches, a rotary encoder and optional hotswap, loosely based on the REVIUNG41.
KeyboardsA DIY wireless split 4x12 ortholinear keyboard kit that connects through a custom USB receiver, runs QMK, and accepts either MX-style or Kailh Choc switches.
KeyboardsThe Halcyon Kyria is a 40% split keyboard from splitkb with up to 50 keys, a columnar stagger, a large arc-shaped thumb cluster and hot-swap sockets.
KeyboardsA PCB kit from splitkb.com that redesigns Makoto Kurauchi's Helix as an ortholinear split keyboard with a number row and up to 64 keys.
KeyboardsA 42-key split keyboard PCB with column stagger, sold by splitkb.com as a redesign of Foostan's Corne. Switches are hot-swappable, it comes in MX and Choc versions, and it accepts wired RP2040 (QMK/Vial) or wireless nRF52840 (ZMK) controllers.
Keyboardssplitkb.com's redesign of Naoki Katahira's Lily58: a 58-key split keyboard sold as a pre-soldered, hot-swap PCB assembly in MX or Choc v1 versions.
KeyboardsAn open-source DIY 54-key column-staggered split keyboard with a number row, built on the RP2040-Zero, with hotswap sockets for MX switches.
KeyboardsminiDivide is a split, column-staggered DIY keyboard kit with a narrow 16mm key pitch, with optional wireless use via BLE Micro Pro.
KeyboardsA 38-key split DIY keyboard kit with a 16mm key pitch, redesigned from miniDivide, with hot-swap sockets and optional wireless via BLE Pro Micro.
KeyboardsA unibody 42-key DIY keyboard kit for Pro Micro with a symmetric column-staggered layout that places the hands at a natural angle.
KeyboardsMaggie42cs is a 42-key split DIY keyboard kit with a symmetric column-staggered layout, supporting MX-compatible and Choc switches.
KeyboardsMaggie42x is a 42-key split DIY keyboard kit with a symmetrical column-staggered layout, using Bluetooth via AA batteries and Seeed Studio XIAO nRF52840 controllers.
KeyboardsA solder-required ortholinear kit with up to 60 keys in 4 rows by 15 columns, sold as a unibody board or as a 7/8-column split, with wired and wireless connection and a dock that only supplies power.
Vertical miceA rechargeable vertical mouse that connects over a 2.4GHz receiver or Bluetooth 5.0 to up to three devices, with RGB lighting, silent clicks and six DPI steps from 800 to 4800.
An open-source, PCB-based finger-operated trackball running ZMK on a nice!nano, supporting 34 to 55 mm balls with wired, Bluetooth or dongle connection.
A PCB-based finger-operated trackball running ZMK firmware, with interchangeable ball support plates for different ball sizes (the page provided describes v4).
The Trust GXT 144 Rexx is a wired, right-handed vertical gaming mouse with a 10,000 DPI optical sensor and 6 buttons.
The Trust Verro 23507 is a right-handed wireless vertical mouse with a 60° angle, a 2.4 GHz USB receiver, 6 buttons and a 1600 dpi optical sensor.
KeyboardsA 52-key wireless split keyboard with column stagger, Choc v1 hotswap sockets, dual nice!view displays and ZMK firmware, offered as a DIY kit or prebuilt.
KeyboardsA split ortholinear Cherry MX hot-swap keyboard kit with an RP2040 controller and QMK/Vial support, whose breakaway row and columns let it be cut down from 70 keys to as few as 36.
KeyboardsA hotswap split ortholinear 65%-sized keyboard kit with an RP2040, QMK/VIAL support and an optional tent and tilt bolt kit.
VicTsing's rechargeable vertical Bluetooth mouse; the supplied page was only a robot-check screen, so no specs could be verified.
KeyboardsA 34-key split keyboard with Choc V1 hotswap sockets, with each half sized to the footprint of a floppy disk (90x94 mm).
KeyboardsClaw44 is a DIY split keyboard by yfuku with a 3x6 column-staggered grid and four thumb keys per half, running QMK on a ProMicro.
KeyboardsA 62-key split, column-staggered DIY keyboard kit from YMG WORKS with MX-compatible hot-swap sockets and keymap editing through REMAP.
KeyboardsA DIY split column-staggered keyboard kit that keeps the Ergo The End layout and can mount a 34mm trackball unit.
KeyboardsA DIY split column-staggered keyboard kit with a mountable trackball unit, hotswap sockets, and QMK firmware with Remap support.
KeyboardsA 44-key split 40% DIY keyboard with column-staggered 3x6 grids plus four thumb keys per side, accepting both Cherry MX-compatible and Kailh Choc V1 switches.
KeyboardsA 44-key split, column-staggered 40% DIY keyboard kit built on the Raspberry Pi Pico that takes both Cherry MX-compatible and Kailh Choc switches.
KeyboardsA DIY split JIS-layout keyboard kit modeled on the Apple Magic Keyboard layout, with sockets for MX and Kailh Choc switches.
KeyboardsA wired split keyboard kit using the Lotus layout with a 34mm trackball on each half, which needs the microcontroller and sensors soldered by the builder.
KeyboardsAn open-source, compact split ortholinear DIY keyboard designed by MakotoKurauchi, assembled by soldering and running QMK firmware.
KeyboardsA DIY split keyboard kit with a standard 65% layout whose halves link over a LAN cable, using a self-printed 3D case and QMK firmware with Remap support.
The ZELOTES F-26C is a low-cost rechargeable vertical mouse with a moderate tilt, connecting via USB receiver or Bluetooth, with a small side OLED display showing connection, battery level and DPI.
ZSA's long-running fully split, column-staggered wired mechanical keyboard with hot-swappable switches and open-source QMK firmware configurable through Oryx.
KeyboardsA 60% DIY keyboard kit with a central trackball and a three-part 3D-printed case with integrated palm rests, designed for lap use (US layout; a JIS version was also listed).
KeyboardsGeaconPolaris is a DIY wireless split low-profile keyboard kit with a 50% GRIN layout, running ZMK.
KeyboardsA wireless ZMK split keyboard kit with a 60% Grin layout, featuring a trackball, OLED and analog stick.
KeyboardsA 60-key split DIY keyboard kit that mounts individual row PCBs on side boards to build a sloped, three-dimensional "2.5D" shape.
KeyboardsA 50-key, row-staggered, fully wireless split keyboard kit whose PCBs come with a certified BLE module already mounted.
KeyboardsA wireless split keyboard kit with a trackball, offered in S, M and L sizes, with Vial-based keymap editing.
KeyboardsA wireless split keyboard kit with a built-in trackball, a 17mm-pitch grid layout, Choc V2 switches, ZMK firmware and AA battery power.
KeyboardsA split DIY keyboard kit with a CNC-machined aluminum gasket-mount case, supporting ANSI and JIS layouts, with an encoder on each half and a built-in USB hub.
KeyboardsA solder-required DIY split keyboard kit with a JIS layout and 92 keys, supporting both hotswap (sockets sold separately) and direct soldering.
KeyboardsA DIY split keyboard kit that divides the main 60% block of the Japanese (JIS) layout into two halves, assembled by soldering.
KeyboardsA 65-key split, Bluetooth-only DIY keyboard kit with sockets for MX-compatible switches.
KeyboardsA 65-key split Bluetooth-only keyboard with a 14mm trackball and a rotary encoder, sold as an assembled unit or a kit.
KeyboardsA DIY kit for a column-staggered split keyboard with 25 keys per hand, a CNC-machined aluminum case and integrated walnut palm rests.
KeyboardsTiny18 is a wireless split 18-key (9 per half) keyboard kit built around the XIAO BLE controller, designed for Kailh Choc v1 switches.
KeyboardsA 60% split keyboard kit for Cherry MX-compatible switches whose Japanese-layout version has 70 keys and an inverted-T cursor cluster, assembled without soldering.
KeyboardsA solder-free, hotswap split keyboard kit for Kailh Choc switches, with a 3x6 column-staggered layout plus three thumb keys per half (up to 46 keys) and an included case.
KeyboardsA split ortholinear DIY keyboard kit for Kailh low-profile and Choc V2 switches, available as 5 rows/64 keys or 4 rows/50 keys.
KeyboardsA DIY split keyboard kit with 40 keys in a grid layout and a thumb-operated rotary encoder on each half.
KeyboardsRe42 is a solder-it-yourself kit for a 40% split ortholinear keyboard with 42 keys and a thumb-operated rotary encoder on each half.
KeyboardsA 64-key, 60% split keyboard kit you solder yourself, with a thumb-operated rotary encoder on each half and Kailh sockets for swapping switches.
KeyboardsA solder-it-yourself 65% row-staggered split keyboard kit with 67 keys, QMK firmware, and room for up to one trackball on each half.
The supplied page (the Basekeys home page) has no 2Moons Slice specs, so the specs are unverified.
KeyboardsA solder-required split DIY keyboard kit using a narrow 17mm key pitch, Kailh Choc v2 switches and a fan-shaped ortholinear layout that curves toward the center.
KeyboardsA DIY split 65% keyboard kit with vertical (column) stagger and arrow keys, sold by Keebio in MX or Choc versions with hotswap sockets pre-soldered and QMK/VIA firmware.
KeyboardsAn open-source split mechanical keyboard from Afternoon Labs with a column-staggered 6x4 alphanumeric layout, arrow keys and a 6-key cluster, sold as a hotswap DIY kit.
KeyboardsThe Afternoon Labs Breeze is a 65% split DIY kit with a vertical stagger, hotswap sockets and QMK firmware with VIA support.
KeyboardsAn open-source DIY 34-key split keyboard design from altosys with an aggressive column stagger, Kailh hot-swap sockets for Cherry MX switches, and QMK firmware.
KeyboardsA wired, split 70-key DIY keyboard kit with an integrated index-finger-operated 55mm trackball; sales have ended.
KeyboardsA DIY split keyboard kit running ZMK, with a 55mm trackball built into the right half for index-finger control.
KeyboardsAn open-source DIY 44-key diodeless split keyboard based on the Cantor, using Choc v1 switches with optional hotswap sockets and Blackpill controllers running QMK.
KeyboardsAn open-source 44-key diodeless split keyboard forked from Piantor/Cantor, using two Raspberry Pi Picos, Choc v1 switches and a flippable PCB that takes either hotswap sockets or soldered switches.
KeyboardsA DIY kit for a fully wireless, split, low-profile 60% keyboard with JIS layout; includes PCBs and 3D-printed covers, and requires soldering.
The supplied pages were error pages or generic site chrome, so no specifications for the Handshake Mouse VS4 could be confirmed.
An entry-level vertical mouse for left- and right-handed users with three connection modes: Bluetooth, 2.4G USB-C dongle and wired USB-C.
KeyboardsA 3x6 split ergonomic keyboard kit with an integrated 34mm trackball, sold unassembled without keycaps, switches or cables.
KeyboardsAn open-source split keyboard DIY kit with a concave keywell, thumb cluster and a thumb-side trackball, running QMK.
KeyboardsA 35-key split keyboard kit with an integrated trackball, sold with optional 3D-printed case and tents.
KeyboardsScatter42 is a 42-key, 40% split keyboard with a columnar-staggered layout, supporting Cherry MX and Kailh low-profile switches, published as an open-source DIY design.
A 62-key split aluminum keyboard from Blank Tehnologii with magnetic polycarbonate wrist rests and hot-swap sockets.
KeyboardsA 58-key split keyboard based on the Lily58 layout, offered by Boardsource as a case and PCB pairing a machined aluminum top with a frosted polycarbonate bottom.
KeyboardsBoardsource's CNC aluminum case for the Corne (CRKBD), a split, column-staggered 3x6+3 layout, compatible with its hot-swap SMT PCB and standard Corne PCBs.
KeyboardsA Choc low-profile variant of the open-source Sofle, a column-staggered split keyboard with encoder support that runs QMK firmware.
KeyboardsA column-staggered split keyboard from CannonKeys based on the Sofle58 v2, with a CNC aluminum case and a choice of a wired RP2040 PCB or a wireless ZMK PCB.
KeyboardsOpen-source DIY split keyboard designed with Ergogen and based loosely on the Ergodash, with 62 MX switches, a QMK RP2040 controller, optional rotary encoders, an OLED and a Cirque touchpad.
KeyboardsA wired Alice-layout keyboard kit with a gasket-mounted acrylic case; switches and keycaps are not included.
KeyboardsA DIY 40% split keyboard kit made of two separate PCB halves with no link cable between them, so each half connects to the computer over its own USB cable; it runs QMK firmware.
KeyboardsA wireless split Choc v2 low-profile keyboard kit with a 25mm trackball, touch sensors and AAA battery power, running ZMK; soldering required.
KeyboardsA 40-key split ergonomic DIY keyboard inspired by the Architeuthis dux, with splayed columns, Choc spacing and optional TrackPoint mounting.
KeyboardsA wired, hot-swappable mini Dactyl Manuform split keyboard kit with a 3x5 grid per half, a concave columnar keywell and a ManuForm-style thumb cluster.
KeyboardsA 54-key unibody split DIY kit sold by Keebio, with a 1.28" circular OLED and a choice of MX or Choc V1 hotswap versions.
The Delux M618V is a semi-vertical wireless mouse with 2.4G RF, 5 buttons and an AI voice input feature.
KeyboardsA solder-it-yourself 40% keyboard kit with a 6×3 + 3 thumb key split layout, a central numpad, and an RP2040-Zero controller.
KeyboardsAn open-source 36-key split keyboard by dlford for smaller hands, with steep column stagger, MX hot-swap sockets, per-key RGB, OLED displays and piezo speakers.
KeyboardsAn open-source 42-key split DIY keyboard by Dwctor that uses Choc v1 switches, Blackpill controllers, and the same PCB for both halves.
KeyboardsAn open-source DIY 58-key split, column-staggered, low-profile keyboard using Choc V1 switches, with a wired QMK variant and a wireless ZMK variant.
KeyboardsA DIY split keyboard kit with a reverse tilt, an RP2040 controller and choc v1 switch sockets.
Compact 46-key version of Ergohaven's wireless split K:04, using low-profile Gateron KS-33 switches by default, with optional trackball, touchpad or encoder modules that fit on either half.
KeyboardsA DIY 36-key split keyboard by Etienne Collin using Choc V1 switches, with a reversible PCB and Mini DIN 4 connectors between the halves.
The Fellowes Breyta Medium is a right-handed vertical mouse with a 60° angle, offering Bluetooth or wired USB Type-C connection and a built-in rechargeable battery.
KeyboardsThe fingerpunch tenbit is a 5×12 ortholinear DIY PCB with MX/choc hotswap sockets, per-key RGB and optional Cirque trackpad support.
KeyboardsA DIY 34-key, Choc-spaced true split keyboard by Florent Linguenheld, built around an RP2040-Zero-class MCU with TRRS links and running QMK or custom Rust firmware.
KeyboardsAn open-source 50-key 40% ortholinear split keyboard by floookay with a 3D-printed case whose typing and tenting angles are adjustable.
KeyboardsA skull-shaped split ergonomic keyboard kit designed by Gleb.Sexy, with a pre-soldered PCB, hotswap Choc V1 sockets and acrylic parts.
KeyboardsHEball is a 40% split DIY keyboard kit with a built-in trackball, using magnetic switches (KS-20 compatible).
KeyboardsKoa46 is a split keyboard kit with a Grin layout and a trackball under the right thumb.
KeyboardsA DIY 58-key split keyboard built around Pro Micro controllers and Kailh hot-swap sockets, with a build process similar to the Solfe.
KeyboardsA PCB-only kit for a 34-key split keyboard based on the Half-Swept, redesigned to use Waveshare RP2040-Zero microcontrollers and Kailh Choc switches, with the halves joined by a TRRS cable.
KeyboardsAn open-source split keyboard from Idle Builds with a 3×5 column stagger, two thumb keys per side and a modular pinky column, built as 30 or 32 keys.
KeyboardsA fully split, 2.4 GHz-only wireless hot-swap mechanical keyboard barebone inspired by the Alice layout, sold without switches or keycaps.
The fluorite is a "140% keyboard" by ihotsuno, added to QMK firmware as a supported keyboard.
KeyboardsAn open-source DIY split keyboard by illness072, influenced by claw44, with a fairly aggressive pinky stagger, a four-key thumb arc, hot-swap sockets and an OLED display.
A Microsoft-designed, tenkeyless split-style ergonomic keyboard from Incase with scissor keys, a cushioned palm rest, a Copilot key and Bluetooth for up to three devices.
A solder-it-yourself split ErgoDox-style keyboard kit from Input Club with 38 column-staggered keys per half, thumb clusters, and an LCD on each half.
The Jelly Comb MV009 is a vertical mouse that needs a USB A slot and is listed as compatible with Windows and Linux; the pages do not state its angle or button count.
The Jelly Comb MV014 is a silent 2.4G wireless vertical mouse with a USB receiver and three DPI settings (800/1200/1600).
A wireless vertical mouse with Bluetooth 4.0 and 2.4G USB receiver connections, silent clicks and three DPI levels.
The Jelly Comb MV09E is a left-handed wireless vertical mouse that connects through a 2.4GHz USB receiver.
A rechargeable vertical mouse with a 2.4GHz USB receiver and three DPI levels (1000/1600/2400).
KeyboardsA hot-swappable split mechanical keyboard kit with a 3D-printed case and 2.4GHz wireless, sold without switches or keycaps.
KeyboardsJorne is an open-source DIY split keyboard that extends the Corne to 44 keys, adding keys for brackets and international layouts, with PCB gerbers and case files published on GitHub.
KeyboardsOpen-source DIY split keyboard with a 4x6 grid per half, 2–3 thumb keys and inner macro keys, built around a Pro Micro and sized to fit a 23 x 14 cm carrying case.
An open-source 58-key column-staggered split keyboard by Julian Yap that runs on RP2040 Zero controllers and connects its halves over RJ45.
A made-to-order sculpted split keyboard whose 3D-printed key wells are designed from measurements of the buyer's hand bones.
KeyboardsScythe from Kagizaraya is a 60% split DIY keyboard kit with a symmetric layout, and the builder solders all the parts, surface-mount MCU included.
KeyboardsA 70-key split DIY keyboard with a trackball by kakunpc, supported in QMK firmware.
KeyboardsA DIY keyboard from kakunpc, whose BOOTH shop sells self-built keyboards; the page provided gives no product specs.
KeyboardsA Corne-style 3-row split keyboard kit with hotswap sockets for Choc V1 low-profile switches, running QMK with VIA for remapping.
KeyboardsA discontinued DIY 40% split keyboard PCB kit from Keebio with a conventional row-staggered layout and support for MX or Alps switches.
KeyboardsThe Keebio Quefrency Rev. 4 is a hotswap split row-staggered PCB kit that can be built as a 60%, 65% or 65XT layout; it is now discontinued.
KeyboardsA 40% split ortholinear PCB kit from Keebio that adds two extra thumb keys per half to a Let's Split/Levinson-style layout. It runs QMK/VIA and is currently sold out.
KeyboardsThe Keebio Sinc LM is a split 75% keyboard with standard 19.05mm MX spacing, low-profile Choc V2 hotswap switches, and QMK/VIA firmware.
KeyboardsThe Lily58L is a 58-key column-staggered split keyboard PCB from Keycapsss, based on the Lily58 Pro. It takes MX hot-swap sockets and runs QMK, with optional rotary encoders, a Pimoroni trackball, OLED displays and RGB lighting.
KeyboardsA tiny split ortholinear DIY keyboard with 3 rows × 6 columns plus 1 thumb key per half (38 keys total) and hot-swap MX sockets.
KeyboardsOpen-source DIY Alice-style keyboard by kreme123 with an arrow cluster, rotary encoder support, an Elite-C controller, a gasket-mounted PCB and a stacked acrylic case.
KeyboardsA low-profile 66% split DIY keyboard kit for Kailh Choc switches, with arrow and thumb keys and Pro Micro controllers shipped with a VIA-compatible keymap.
KeyboardsA DIY split keyboard kit with a reduced key pitch for Kailh Mid-Height switches, aimed at small hands, with 65 keys (70 optional) and QMK firmware.
The lucky_studio kafkaSplit is a keyboard whose specs could not be verified because the only supplied page returned 404.
A split 40% ortholinear keyboard with the same footprint as the Let's Split, adding on-board USB-C and RGB underglow and running QMK firmware.
KeyboardsA 40-key split ortholinear wireless DIY keyboard kit running ZMK, with a trackball on each half.
KeyboardsA DIY split keyboard kit with a qaz layout; the PCB and switch plate were sold on BOOTH, and the acrylic case data is a free download.
KeyboardsThe Hillside 46 is an open-source 46-key split keyboard for Choc v1 switches, with a splayed column-stagger layout and both QMK and wireless ZMK firmware available.
KeyboardsAn open-source, non-splayed 48-key split keyboard for Choc v1 switches, with aggressive column stagger, a five-key thumb arc, and QMK or wireless ZMK firmware.
KeyboardsA 42-key wireless split keyboard kit with a 25mm POM trackball and a PAW3222 sensor.
KeyboardsA DIY split keyboard kit with 22 keys per half in a steeply curved 3D layout designed for DSA keycaps, plus a thumb-operated joystick.
KeyboardsAn open-source 38-key split DIY keyboard generated with Ergogen, with trackpoint support and Choc v1 hotswap sockets.
The only page provided for the nacly sodium62 returned a 404, so no specifications could be confirmed.
A five-button Bluetooth 5.0 thumb trackball powered by one AA battery, with a magnetic stand that changes its tilt between 36° and 46°.
KeyboardsThe cool642tb-mini is a 42-key split, ortholinear Bluetooth keyboard with 17mm key pitch, a 25mm trackball and a scroll encoder, derived from the cool642tb.
The NSI E50-76A31D is a USB industrial desktop trackball with a 50 mm ball, an IP68 sealed body and a hall-effect scroll wheel.
An IP40-sealed industrial desktop trackball from NSI with a 38 mm ball, five switch functions, a button for switching between left- and right-handed use, and a USB connection.
The NSI R60 is a USB desktop trackball with a 63 mm ball in an ABS enclosure, aimed at office, CAD/CAM and clean industrial use.
A custom split mechanical keyboard from Posey's Mechanical Keyboards aimed at gaming, with a hotswap PCB and a USB-C connection.
KeyboardsA barebones 36-key split keyboard for MX switches, designed by Ray Cheng around the Miryoku keymap and sold by Posture Atelier with selectable PCB, case, MCU and display options.
KeyboardsAIDABALL is a ZMK-based BLE/USB-C trackball unit with a 25mm ball and four Choc v2 switches, designed to sit between the halves of a split keyboard.
KeyboardsThe Atreus62 is a 62-key DIY variant of the Atreus keyboard, sold by Profet Keyboards as blank or pre-soldered PCBs and component kits. It runs QMK firmware and connects over USB through a Pro Micro.
The rainkeebs trailmix is a keyboard with a QMK firmware fork adding support for it, but the provided pages give almost no specifications.
KeyboardsChoco60 is a 62-key split 60% DIY keyboard kit based on a programmer-style (HHKB-like) layout, with an acrylic sandwich-mount case.
KeyboardsCocoa40 is a 46-key 40% split DIY keyboard kit for programmers, with added symbol keys usually omitted on 40% layouts.
KeyboardsA 58-key MX hotswap ergonomic keyboard kit from RGBKB, built as a variant of the Phobos layout on the Sol 3 platform.
The RGBKB Zygomorph page returned 'Page not found', so no specifications could be confirmed.
KeyboardsA DIY kit for a fully wireless split keyboard with an HHKB Japanese-layout-compatible key layout, hot-swap sockets for both Choc and MX switches, and ZMK firmware.
Keyboardsyosino58 is a DIY keyboard project published on GitHub by sakurachari (sakuranbo0046); the repository holds PCB and case files, plus separate folders for Cherry and Chocolate variants.
The only mention on the provided page is an NKNL7 series blog category by Salicylic_acid3, and no specifications are given.
KeyboardsA 54-key (27 per side) column-staggered split keyboard with hotswap sockets, per-key underglow and QMK firmware, published as an open-source DIY design.
The Cygnus is an open-source, Dactyl-inspired 36-key split keyboard by Juha Kauppinen (scytile). You build it yourself: the case is 3D-printed, the switches are handwired, and each key well is curved.
KeyboardsA ZMK-based 20mm trackball with 3 keys (6 on the Plus) that can sit on a desk or be embedded in a keyboard's spacebar area, with wired and wireless connection.
KeyboardsA DIY wireless split keyboard kit with 6x3 column-staggered keys and a 3-key thumb cluster per half; it connects through a USB receiver, runs QMK, and each half is powered by a CR2032 coin cell.
KeyboardsThe Centromere LP from Southpaw Design is a split wireless keyboard kit that connects through a USB receiver, runs QMK, and can be built with either Kailh Choc low-profile or MX-style switches.
KeyboardsA wireless split keyboard kit for low-profile Kailh Choc switches, using a USB receiver and customizable via QMK, with a hot-swap option.
KeyboardsThe Centromere Plus is a solder-yourself split wireless keyboard kit that takes either Cherry MX-style or Kailh Choc switches, connects through a USB receiver, and is configured with QMK.
KeyboardsA solder-it-yourself split wireless keyboard kit from Southpaw Design that connects through a USB receiver, runs QMK, and powers each half from a CR2032 coin cell.
KeyboardsA wireless, QMK-programmable 5-row split ortholinear keyboard kit from Southpaw Design that runs on a CR2032 coin cell and connects via a micro-USB receiver.
KeyboardsThe Meiosis is a split wireless 5x12 orthogonal keyboard kit from Southpaw Design that connects through a USB receiver and is programmable with QMK.
KeyboardsA 4-row split ortholinear wireless keyboard kit from Southpaw Design that runs on CR2032 coin cells, connects through a micro-USB receiver and supports QMK.
KeyboardsA 68-key wireless split keyboard PCB kit running ZMK on two XIAO nRF52840 boards, with a gasket-mount PCB design and EZ-VIK add-on connectors.
KeyboardsA 68-key split keyboard DIY kit built around two Raspberry Pi Picos running QMK, with MX or Choc hotswap sockets and support for rotary encoders, LCDs, Cirque touchpads and VIK modules.
KeyboardsA DIY 52-key split keyboard kit for Choc V1 switches, running QMK on an RP2040 Pro Micro, with per-key RGB and EZ-VIK connectors.
KeyboardsA DIY PCB kit for a 68-key split keyboard with Choc hotswap sockets, running QMK on a Waveshare round LCD RP2040 board.
KeyboardsA 42-key split DIY keyboard kit from splitkb.com, redesigned from the Corne, running QMK or ZMK with MX or Choc hotswap and hand-solder variants.
KeyboardsA PCB kit from splitkb.com that redesigns Naoki Katahira's open-source Lily58: a 58-key split keyboard with a number row, offered in MX hotswap, Choc hotswap, or hand-solder versions.
KeyboardsA 58-key split keyboard PCB kit with a number row and rotary encoders, splitkb.com's redesign of the open-source Sofle v2, offered in MX hotswap, Choc hotswap, and hand-solder versions.
KeyboardsA 34-key split DIY PCB kit from splitkb.com, redesigned from the open-source Sweep, available with MX or Choc hotswap or hand-solder options and supporting QMK or ZMK.
KeyboardsA 34-key split ortholinear DIY keyboard by Steven Karrmann, using a reversible PCB that doubles as the bottom plate.
KeyboardsA 5x6 ortholinear split keyboard with Hall effect (magnetic) switch support, an aluminium case, and Vial firmware with adjustable actuation and rapid trigger, sold by Singapore-based Sunder.
KeyboardsA split Hall effect keyboard kit with an aluminium case, a 7° typing angle and QMK Vial firmware that supports adjustable actuation and rapid trigger; switches and keycaps are bought separately.
KeyboardsA 44-key split DIY keyboard kit with aluminum top plates and a tented case, built around Pro Micro controllers.
A minimalist 36-key split keyboard in the 3x5+3 layout, built on an STM32 controller with Vial-compatible QMK firmware, per-key RGB, and USB-C on both halves.
A split ergonomic keyboard with concave keywells, a down-sloping thumb cluster and hot-swap sockets, designed by a family doctor and planned for a Kickstarter launch; keymaps can be edited with QMK, VIA, Vial or the web-based Taikohub Toolbox.
KeyboardsA 95-key split DIY keyboard kit with a Japanese layout and a numpad built into the left half.
KeyboardsA DIY split keyboard with 4×7 vertically staggered keys and 4 thumb keys per half, running QMK.
KeyboardsA wired low-profile split keyboard kit with hot-swappable switches, an aluminium bottom and QMK/Vial firmware.
KeyboardsA DIY 52-key split, columnar-staggered keyboard designed by Tom Saleeba, mixing MX-style and Kailh choc switches to provide many thumb keys.
KeyboardsA DIY kit for a 40% split keyboard, planned for distribution at Keyket and listed on BOOTH.
A discontinued split keyboard from Unikeyboard with a 5x7 matrix on each side plus three thumb keys, driven by a Pro Micro and supported in QMK.
The provided page returned 404, so no specs could be verified and this record holds unverified placeholder values.
KeyboardsA DIY split keyboard inspired by the Corne, with 3x6 strongly column-staggered keys and 3 thumb keys, hotswap sockets and QMK firmware.
A VicTsing 2.4G wireless vertical ergonomic mouse with 6 buttons and four DPI levels (1000/1600/2000/2400), powered by two AAA batteries.
A 40% split keyboard derived from the SP-111, with an F row, left macro column and arrow keys, using one ATmega32U4 controller per half linked over USB Type-C and running QMK.
KeyboardsWeekin's wireless split mechanical keyboard kit in a PLA case, with hot-swap MX sockets, VIAL configuration and a 2.4GHz receiver that has a TFT screen on the single-mode version.
KeyboardsA 1upkeyboards revision of Wootapatoot's Let's Split: a 40% ortholinear split keyboard kit with two 4×6 halves, an RP2040 controller, hot-swap sockets and USB-C between the halves.
The only page provided was a Cloudflare error page, so no specifications for xdboards/recon could be verified.
The supplied page was only a bot-check screen, so no DeltaSplit75 specs could be verified.
wings42 is a DIY split keyboard by yfuku (Daily Craft) with a 3x6 column-staggered grid and three thumb keys per half, running QMK on a Pro Micro.
Yiancar-Designs Doppelganger keyboard; the only page provided was a bot-check screen, so specs could not be verified.
KeyboardsA wireless split 40% keyboard kit running ZMK firmware, powered by AAA batteries, with a gasket-mount plate and a 3D-printed case and wrist rest included.
KeyboardsA compact split ortholinear DIY keyboard kit in the Helix family, supported by QMK firmware.
A wired vertical gaming mouse released in 2020 with 11 programmable buttons, a 5-direction thumb joystick and a sensor adjustable up to 10,000 DPI.
KeyboardsThe z34 is an open-source DIY split keyboard with 34 Choc v1 switches in a 3x5 plus two-thumb-key layout per half, driven by a Pro Micro and running QMK.
KeyboardsAn experimental DIY split keyboard kit whose shiftable hot-swap switch sockets let you try many row-staggered layouts on one board.
KeyboardsOpen-source DIY 40-key split keyboard on XIAO controllers, built either as a wired QMK version or a wireless ZMK version, with aggressive stagger and splayed pinky columns.
KeyboardsAn open-source split keyboard family by zzeneg with 38 or 40 keys, an LCD display and a Cirque trackpad, available in MX and Choc versions.
KeyboardsA 48-key split ortholinear DIY keyboard kit in the style of Let's Split, with its through-hole components placed visibly on the top side.
KeyboardsA 48-key split ZMK keyboard with a built-in trackball, powered by AAA batteries and sold as a build kit.
A 2.4GHz wireless, 5-button finger-operated trackball with switchable counts, sold in black and white.
KeyboardsA DIY wireless keyboard kit running ZMK with a Lotus layout, supporting MeKaBu modules, an OLED and a direction switch.
KeyboardsA low-profile wireless split keyboard kit for Choc V2 switches, with a low-mounted 25mm or 19mm trackball, running on ZMK firmware and AA/AAA batteries.
KeyboardsA solder-required split 65% keyboard kit with an optional trackpad, duplicated 6/Y/G/B keys on both halves, and AAA-battery wireless operation via BLE Micro Pro.
KeyboardsA split DIY keyboard kit built on the RP2040, with JIS and US layouts and MX-compatible hotswap or solder-in switches.
KeyboardsA 65-key split keyboard from Teramiya Lab that connects over Bluetooth only, sold as a nearly finished, no-solder build in either a machined aluminum case or a plastic case.
KeyboardsThe poti48 is a 48-key split DIY keyboard kit that can mount a TrackPoint, with Vial support, hot-swap sockets and a wired Pro Micro connection.
The provided page returned 'page not found', so no specifications could be verified.
KeyboardsA prototype 60-key split DIY keyboard kit with seven thumb keys and two palm keys on each half.
KeyboardsA 65% split DIY kit sold by Keebio with pre-soldered diodes and hotswap sockets, so only the microcontrollers need soldering.
KeyboardsAn open-source split keyboard PCB project derived from the crkbd, with 5 rows and 7 columns per side and a key arrangement close to standard QWERTY.
The Skeletyl is a compact, open-source, Dactyl-style split keyboard from Bastard Keyboards, sold as a kit or with 3D-printable case files, running QMK firmware.
A 96-key DIY keyboard kit with switches laid out in a 6-row by 16-column grid; you have to solder it together and supply your own switches and keycaps.
KeyboardsA hobbyist DIY split keyboard with 38 keys per half (5x7+3), hot-swap sockets for MX and Choc switches, tested with QMK firmware.
KeyboardsA DIY split keyboard with 3x6 column-staggered keys, one pinky key and three thumb keys, built on a Pro Micro and supported in QMK.
A 70-key DIY keyboard kit inspired by the ErgoDox, with a QMK PCB that can be broken into split halves and is designed around standard keycap sets.
KeyboardsAn open-source DIY split keyboard powered by Raspberry Pi Pico, with a 4x6 layout, aggressive columnar stagger, 2–4 rotary encoders and per-key RGB.
KeyboardsA DIY split, column-staggered QMK keyboard heavily inspired by the ErgoDox, with more keys.
KeyboardsA DIY modular keyboard/keypad built from 25-key 5x5 PCBs, up to three of which can be joined and driven by a single Arduino Micro clone.
KeyboardsA small DIY split ortholinear keyboard, described as a wider Gherkin with dedicated thumb switches, whose two halves connect over a TRRS cable.
KeyboardsA 42-key diodeless split DIY keyboard by Diego Palacios, with a Corne-like layout and stronger column stagger, running QMK.
KeyboardsA small DIY split ergonomic keyboard from Dm9Records (hsgw) that runs QMK Firmware.
KeyboardsAn open-source 60-key split keyboard by elagil with a 6x4 main grid and six thumb keys per half, supported in QMK firmware.
KeyboardsAn open-source, QMK-powered split keyboard derived from the ErgoDox, with Cherry MX-style switches in a 7x5 column-staggered layout; Falbatech sells the PCBs and bamboo cases.
KeyboardsAn open-source 4x7 split keyboard by floookay with an Ergodox-like columnar stagger and wide space keys, running QMK.
A compact 50-key split keyboard running QMK, compatible with i2c modules and a trackball, offered as a kit, partial build, or ready-made unit.
KeyboardsAn open-source DIY column-staggered split keyboard with 36-42 keys, designed by GEIGEIGEIST, with QMK and ZMK firmware options.
KeyboardsAn open-source DIY split keyboard with an Alice-inspired layout, based on the Red Queen, using Kailh hotswap sockets and QMK firmware.
KeyboardsAn open-source 6×4+6-key column-staggered split keyboard based on Lily58, Corne, Helix and Sofle, with encoder and joystick support.
KeyboardsAn open-source DIY keyboard from idank, published on GitHub as KiCad PCB files plus a plate design that has tenting holes.
An open-source 34-key split keyboard from Idle Builds with a column-staggered 3×5 + 2 thumb-key layout, hotswap Kailh Choc V1 switches, and BLE wireless via the nice!nano v2.
KeyboardsAn open-source split keyboard derived from the Sweep and Ferris, with 18 keys per half, hotswap MX sockets and QMK firmware.
KeyboardsA 60% split keyboard by KamoNanban, with design files published on GitHub under the MIT license.
KeyboardsAn open-source 4x6 split, column-staggered DIY keyboard by Keith Wade with MX hot-swap sockets and an optional nice!nano wireless build.
A hand-soldered split keyboard kit from Keystone Caps that started as a left-hand gaming pad, with hot-swap sockets and QMK firmware.
KeyboardsAn open-source 70-key (7x5) column-staggered split keyboard inspired by the Lily58 and Sofle, running QMK firmware.
KeyboardsAn open-source DIY split keyboard laid out as 3x14 with spacebars on a fourth row, built on a reversible PCB that takes MX, Alps or Choc switches.
A 70-key, column-staggered split keyboard by Dom (Malevolti), inspired by the Corne, Lily58 and Sofle and designed to be printed and built at home.
KeyboardsA 34–36 key DIY split keyboard by MangoIV with an aggressive Kyria-like pinky stagger, a thumb cluster designed for larger hands, one OLED per side, and QMK firmware.
A solder-it-yourself split keyboard kit with an Alice-inspired layout; this mirrored version uses the mirrorable PCB, plate and bottom on both halves, and it runs QMK on Pro Micro controllers, with OLEDs and optional encoders.
The Hillside 52 is a 40% split column-staggered keyboard with Choc-spaced keys, a slight splay, and a 3x6+3+5 layout that includes a physical arrow T.
KeyboardsHalfCliff is a keyboard project published on GitHub by N2-Sumikko; the pages give almost no specifications.
KeyboardsAn open-source DIY 62-key split keyboard derived from the Atreus62, built on a reversible PCB that takes MX, Alps or Choc switches and a Pro Micro controller.
KeyboardsAn open-source DIY split keyboard that takes the Ergodox layout, drops the thumb cluster, and uses 32 Cherry MX-compatible keys per half, with the controller built into the PCB to keep it slim.
KeyboardsA free-to-use 34-key column-staggered split DIY keyboard for Kailh Choc (PG1350) switches, with open PCB files under the MIT license.
The ErgoDash Mini is a DIY split keyboard kit with a column-staggered 4×7 layout and no number row; its switches are soldered in during assembly.
A split ortholinear DIY keyboard kit from omkbd whose row and column counts are chosen at build time, running QMK firmware.
KeyboardsAn open-source DIY fork of the Lily58 that turns the key below the controller into a rotary encoder and adds RGB lighting, keeping the 58-key column-staggered split layout.
KeyboardsA DIY split keyboard that is a Lily58 variant, using SMT components, an RJ45 interconnect and an STM32F103 MCU.
KeyboardsA custom 48-key split DIY keyboard by Pablo Jiménez Mateo, built with Choc switches and RP2040 Pro Micro controllers.
Fortitude60 is a 60-key (12x5) split keyboard kit by Pekaso with a column-staggered layout. It runs QMK firmware, and you solder the switches yourself.
KeyboardsA DIY 36-key unibody split keyboard derived from the nowt36, with an integrated 25mm trackball.
A split ortholinear keyboard kit from RGBKB with an STM32 controller running QMK, MX hotswap sockets, per-key RGB, and a CNC aluminum frame, sold through a 2020 group buy.
KeyboardsA DIY 38-key split, ortholinear, non-staggered keyboard using low-profile Choc switches, with 1.5u thumb arc keys; Karn-1 is wireless via a Nice-Nano-v2.
KeyboardsAn open-source DIY column-staggered split keyboard derived from the Sofle family, built around the Raspberry Pi Pico (RP2040) with rotary encoders, per-key RGB and dual 128x64 OLEDs.
KeyboardsThe Clog is a split 34-key keyboard with pinky clusters, designed as the split version of the Osprette.
A 75% US-layout split DIY keyboard kit designed by Salicylic Acid, hot-swap compatible and sold through Yushakobo.
A DIY 65% column-staggered split keyboard kit with arrow keys on both halves, placed as low-profile Choc switches near the palms.
A 89-key DIY keyboard kit built around the JIS layout. It can be split into two halves and supports Bluetooth with optional BLE Micro Pro boards.
KeyboardsA DIY kit for a 70-key split keyboard using ADELCPS capacitive switches, built around two Pro Micro controllers and QMK firmware.
KeyboardsAn open-source DIY split keyboard based on the Redox, adding three media buttons, a volume knob and a scroll wheel, with QMK firmware.
A hand-wired, 3D-printed 89-key split TKL keyboard using Pro Micro controllers and QMK, with a built-in 6° tent and 3° incline, inspired by the Microsoft Ergonomic 4000.
A 4x6 ortholinear split keyboard inspired by the Planck, sold as a hand-wired kit built around a Pro Micro and a 3D-printed case.
KeyboardsA wireless split ortholinear keyboard kit on a 5x7 grid per half, sold in a 2018 group buy with a USB receiver and support for both MX and Kailh Choc switches.
KeyboardsA single-hand and split keyboard with an ISO enter key, with optional rotary encoder and LED support.
KeyboardsKLEC-02 "Gravity-36" is a 36-key DIY segmented keyboard by takashicompany, built on a Pro Micro with MX switch sockets and supporting QMK and VIA.
KeyboardsPalmbrain is a 34-key split DIY keyboard kit with a 17mm (0.9u) key pitch, supporting Choc v1/v2 switches.
A 73-key DIY split keyboard kit based on the Japanese (JIS) layout with an ISO Enter, designed by takashiski (skyhigh-works), sold on BOOTH around 2019, and running QMK on Pro Micro controllers.
KeyboardsAn open-source split keyboard kit with 3x7 column-staggered keys and four low-profile thumb keys per half, built around Pro Micro controllers.
KeyboardsAn open-source low-profile split ergonomic mechanical keyboard by tapioki with 34 keys, two thumb keys per the QMK readme, and splayed finger columns.
KeyboardsA DIY split keyboard with a 4x6 matrix and a 9-key thumb fan per side, built around Elite-C controllers.
KeyboardsGrandiceps is an open-source split keyboard design by tkw, with PCB, case and plate files published on GitHub.
KeyboardsAn open-source DIY 64-key split mechanical keyboard by QMK maintainer Nick Brassel (tzarc), with a 4-key thumb cluster, a 5-way thumb switch, a rotary encoder and a 240×320 LCD on each half.
KeyboardsA 36/40-key split keyboard based on the Corne with the fifi's physical layout for more stagger, using an embedded RP2040 and QMK, built as a DIY project.
KeyboardsAn open-source split keyboard by vitvlkv with a 4x6 column-staggered layout and 5 thumb keys per the repository, 64 keys total.
KeyboardsA DIY split keyboard design (v3) with 84 MX-compatible switches (42 per hand), with the halves linked by an Ethernet/RJ45 cable.
A 68-key column-staggered split keyboard kit from Yushakobo, built around Pro Micro controllers and running QMK/VIA firmware.
KeyboardsAn open-source DIY split mechanical keyboard with a 4x12 ortholinear grid of 48 keys, built on an STM32 F401/F411 Blackpill and running QMK.
A DIY split keyboard kit from 25KEYS; the provided page did not include its detailed specifications.
The foobar is a DIY split 30% keyboard from 40% Keyboards, with a PCB that fits within 100 x 100 mm. Its halves work together as a split keyboard or alone as a 15-key macropad, and it runs QMK firmware.
The Orbit-X is a compact, high-end split keyboard from ai03 that runs QMK firmware and has an open-source PCB.
An open-source split keyboard by Aidan Smith with a roughly 65% column layout and low-profile switches.
A DIY split keyboard with a 5x7 grid per side, a thumb cluster, an encoder on each half, per-key RGB and OLED support, running QMK on a Pro Micro.
The Oddball is a 39-key split DIY mechanical keyboard with an integrated trackball, columnar staggered keys and QMK firmware.
A DIY 12x5 ortholinear split keyboard designed by Alin Elena, built either hand-wired or on a custom STM32F401-based PCB and running QMK.
A handwired, personal-project split keyboard with a 4x7 layout, three thumb keys and two Y keys, running QMK on a Pro Micro.
The beanaccle KB58 is a split ortholinear keyboard with open-source hardware files and PRK or QMK firmware.
A Boardsource keyboard kit that runs QMK firmware on a Pro Micro or compatible controller, with a V2 PCB revision introduced in April 2022.
A Lily58- and Corne-inspired 6x4 split keyboard kit from Clickety Split with optional rotary encoders and OLED displays, running QMK.
Harite v2 is an open-source split directional keyboard by Dane Lipscombe that uses 5-way switches and a modular thumb cluster, running QMK.
A 46-key split ortholinear DIY keyboard designed by Deductivemonkee in 2017, with a 3x6 grid and a five-key thumb cluster per half, running QMK firmware.
The 6lit is a DIY 6-key macropad whose PCB fits within 100mm x 100mm, and it runs QMK firmware.
A 48-key DIY split keyboard derived from the Let's Split, sold as a PCB kit and running QMK, with either half able to connect over USB.
A 40% split keyboard with a symmetrical layout, inspired by the Zlant and supported by QMK firmware.
A 36-key (5x3+3 per half) low-profile split keyboard from g Heavy Industries (gboards) that uses Kailh Choc switches and runs QMK; it has been unavailable since gboards.ca closed.
An open-source 36-key split keyboard by Harshit Goel, derived from FSund's Pteron with a more natural thumb-cluster arc, built around Pro Micro controllers and designed for the Miryoku layout.
The Theseus75 is a wired 75% split mechanical keyboard kit with integrated USB hubs, a gasket-style mounting system and QMK firmware with VIA support.
An open-source, diodeless 34-key split keyboard from KeyboardDweebs that uses a Raspberry Pi Pico in each half and runs QMK.
Kimiko is a DIY split keyboard sold by the German parts shop Keycapsss; the page provided does not describe this product, so its specs have not been verified.
A QMK-supported split 60% keyboard maintained by csandven, with a slight columnar stagger and Pro Micro-compatible controllers.
The Keyprez Unicorn is a split 65% keyboard with an extra right-hand column, built around Pro Micro-compatible controllers running QMK, with optional hot-swap sockets and a rotary encoder.
Jian is a DIY split keyboard by KgOfHedgehogs; the supplied page does not describe its specifications.
A symmetrical 52-key split keyboard, published as an open-source KiCad project by kjeller.
A roughly 36% split ortholinear DIY keyboard based on the Half n Half, ErgoDox and Helix, with a triple thumb cluster and an optional breakaway palm key.
Jiran is an open-source DIY split keyboard derived from the Jian, using a 6x4 matrix plus three thumb keys and one pinky key, and running QMK firmware.
The LYNXware CAT is a modular split input device built with mouse switches, with swappable thumb and finger modules and optional mouse or gyroscope halves.
A 40-key split ortholinear DIY keyboard built around a Pro Micro and based on the crkbd and Helix designs.
A DIY split, column-staggered keyboard from NaCly, built on its own PCBs with a Pro Micro controller and supported in QMK.
A split, column-staggered keyboard from NaCly built on its own PCBs with a Pro Micro controller and supported in QMK.
An open-source 54-key split keyboard published by narinari in 2019, with a column-staggered layout, a two-level thumb cluster and QMK firmware.
The Arch-36 is a DIY 30% split ergonomic keyboard by obosob, built around a Pro Micro controller and running QMK firmware, with open case files for plate and high-profile cases.
A thin, DIY split ortholinear keyboard by Legonut with 1.5u pinky keys, angled thumb keys and per-key RGB, built around a Pro Micro and running QMK.
A 60% low-profile mechanical DIY keyboard by Salicylic Acid, listed with a US-HHKB layout.
A 65% US-layout split keyboard kit by Salicylic Acid for homebrewers, which basically requires soldering.
A 74-key DIY keyboard kit designed by Salicylic_acid3, built around a Pro Micro controller and running QMK firmware.
A DIY keyboard in Salicylic_Acid's Naked series; the provided page does not list its specifications.
A DIY keyboard kit in Salicylic_Acid's Naked series; the page provided does not list its detailed specifications.
A 64-key ortholinear DIY keyboard by Salicylic_acid3, supported in QMK and built on the Naked64SF PCB with a Pro Micro.
A simple 66-key split DIY keyboard kit running QMK on a Pro Micro, available in Japan through Booth.
A custom-built split ergonomic mechanical keyboard using two Raspberry Pi Pico controllers, with QMK support and hot-swap sockets.
fat-o-tesa is an open-source DIY split keyboard by Stefan Gluszek that runs QMK firmware and uses two halves that are not symmetrical.
A 56-key DIY split keyboard with keys on a 16mm pitch, about 80% of standard size, that runs QMK on a Pro Micro and also supports the BLE Micro Pro.
A DIY split keyboard kit whose halves each run a Pro Micro and connect over TRRS, with 69 Kailh MX hot-swap sockets and QMK firmware.
A DIY split keyboard designed as a compact take on the ErgoDox, using identical left and right PCBs with a Pro Micro controller and QMK firmware.
Dumbo is a QMK-firmware keyboard by trip_trap; the referenced source page was unavailable, so detailed specs are unverified.
The Viktus SP-111 v2 (Styrka v2) is a split, southpaw, near-fullsize keyboard that runs QMK firmware; its second-round PCB adds RGB LED indicators.
A split keyboard project supporting QMK, with per-key RGB backlighting.
An open-source split keyboard inspired by the Lily58 and Kyria, built on a universal break-away PCB so you can mix numpad, nav-cluster, or plain halves.
A wireless split keyboard running ZMK, with a concave keywell, thumb clusters and integrated palm rest; the 3D-printed case files are open source.
A split keyboard with a 65% key layout, built on a Pro Micro (ATmega32u4) controller and running QMK firmware.
A DIY split ortholinear 4x12 mechanical keyboard built around the STM32F103 Blackpill board, with firmware included in QMK.